application Dermis pigmentation: Birth mark, such as: Ota nevus, Ito nevus, black nevus Pigment, such as: sun-burn spots, age spots, speckle, freckle, senior fleck Man made pigment: Blue, black, red, brown tattoo, lips line, eyebrow line Epidermis pigmentation, Speckles: such as freckle, senior flecks, coffee spot. Skin rejuvenation with laser peeling . Principle Therapy of epidermis and dermis pigmentation Utilizing the explosive effect of the Nd: YAG laser, the laser permeate the epidermis into the dermis which includes amount of pigment mass. Since the laser pulses in nanosecond but with super high energy, the shot pigment mass swell quickly and breaks into small pieces, which will be eliminated through metabolic system. Therapy of the dilatation of capillary vessel Utilizing the heat effect of the Nd: Yag Laser, the laser is absorbed by the hemachrome in the capillary vessel, then the capillary vessel become blocked and disappear.   4 Wavelengths Optional : The Picotech Pro enables you to treat the broadest range of tattoo colors, on wide range of skin types.Since each ink pigment color absorbs a very specific wavelength, the Picotech pro is equipped with four wavelengths- 1064nm, 532nm, 650nm and 585nm - used colors ranging from light orange to dark black. 585nm is used on blues, purples, and other colors.Which allows to complete the removal of multicolor tattoos. 650 nm is used on greens, the third most popular ink color for tattoos Red is the second-most-Picotech Pro532nm wavelength has 10 times the power of other laser systems, which facilitates faster clearance of red pigment. PTP Single and Double Pulse Technologies Picotech Pro offers energy delivery in both Single Pulse and Double Pulse modes. Double Pulse technology disperses the laser energy into two consecutive pulses, mitigating peak power while delivering maximum energy of up to 2J per pulse. By creating a flat-top beam, maximum energy may be delivered evenly over the skin without risking epidermal injury. Both Single pulse and Double pulse are available in both the QSW 1064nm and QSW 532nm wavelengths. Korea Imported Joint Arm 1.The machine uses Korea joint arm which ensures Stable output energy, Round spot and Long working life. 2. Red diode laser beam point, find the right treatment area exactly. 3. Spot size can be adjusted from 2 to 10mm，Which could meet different treatment area requirement. Very easy to operate. Intelligent Energy Intensity Detection system When change output energy or spot size, the energy indensity will be calculated automatically by the software. Which will help the operator to set the energy watt and catch the output energy visually. Which will help operator to set the parameter accuratly. Cellular Uniform Light Lens The machine using cellular uniform light lens in the laser generator which could ensure stable and uniform output energy. Auto Water Temperature and Water Flow Testing program When the water temperature is high and water flow speed is slow, the machine will stop work to protect the machine. About Treatment No harm to the hair follicle and normal skin, leaving no scar. Short treating time and easy operation High quality controlled solid-state laser complying with international standard. Tiny sense of pain, Anesthesia is unnecessary in most cases No downtime and interruption of routine activities, no side effect.

Working principle Magshape (HI-EMT) is intended for the treatment of obesity by fat reduction through neuromuscular stimulation and increase of the blood flow. It uses non-invasive high-energy focused electromagnetic technology to stimulate the motor neurons of the body muscles through the energy output from the Electromagnetic field, and trigger the muscles to undergo high-frequency super-contraction. During the process of extreme super-contraction, some muscle fibers occur broken and makedeep remodeling of muscles,that is the growth of myofibrils (muscle enlargement) and the production of new collagen chainsand muscle fibers (muscle hyperplasia), which strengthens themuscles and improves the lines.While super muscle contraction consumes a lot of energy, triggers a large amount of fat breakdown, in order to burn and reducefat. So as to easily achieve the purpose of building muscle and burn fat. At the same time, the muscles are super contracted, it drive the high-speed circulation of lymphatic blood, promotes metabolism, and improves immunity. Advantage （1）Magshape is a multifunctional body shaping and muscle building instrument. It is suitable for slimming, shaping, gainingmuscle,dissolving fat, exercising vest lines and raising hips. （2）It is particularly effective for the buttocks and abdomen. It uses high-intensity focused electromagnetic (HIFEM) field technology to induce short-term bursts of strong muscle contraction, resulting in increased muscle density, reduced volume. It is the only way to help women and men build muscle and burn fat, and is the world's first non-invasive method of lifting hips. (3) By reducing abdominal fat and at the same time establishing a muscle foundation under the fat, help patients achieve a slimmer and more athletic body contour. (4) When applied to the buttocks, it can give the patient a post-exercise shape. But the heating/cooling principle is not used, so there is no risk of burns, scars or swelling. (5) The recommended treatment plan is to perform four 30-minutetreatments within two weeks. The best results will be seenafter three months, and will continue to improve after six months. (6) It can strengthen gluteal muscles or abdominal muscles  and burn fat while maintaining. Handles Different mode: Treatment course 1. 2-3 times a week, 4-6 times as a treatment course. 2. 4-6 treatment courses are best. Depending on the customer's physical condition, obese or long-term non-exercise customers can increase the treatment course. 3. The best effect is 2-4 weeks after treatment. Some people will feel tight muscles just after finishing 4. Additional treatments at intervals of 2-3 months can maintain the most maintained effect Electromagnetic wave(Energy) 0-7tesla Output power 4300W Frequency F1:1-10Hz   F2:1-100Hz Pulse width 300us Voltage 110-220V 50-60/Hz     System mode Sport mode Gentle mode Professional mode Screen 12 inch    Treatment handle I-B1 、II-B2、III-B3、IV-B4 Machine size 1200mm*410mm*766mm Package 1270mm*595mm*950mm Machine in treatment Treatment Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service. Contact with us:  Contact Person: Sunny Zhao, Daria Jia E-mail: Sunny@sanhebeauty.com,  Daria@sanhebeauty.net Whatsapp: +86 18813196949  +86 18831450595

Working principle According to the principle of selective photopyrolysis, when shorted the action time of the laser, the laser energy diffuses less to the surrounding tissue. If the energy is limited to the target that needs treatment, the surrounding normal tissue can be protected, so the selectivity of treatment become stronger.The picosecond laser pulse width is only 1% of the traditional Q-switched laser. Under this ultra-short pulse width, the light energy is too late to be converted into heat energy, and there is almost no photothermal effect.When the laser energy is absorbed by the target, its volume will expand rapidly, and then be blasted and torn into pieces. "The picosecond laser is more powerful and complete in crushing pigment particles and less damaging the surrounding tissue." From the perspective of treatment, the effective rate can reach more than 94% (Ota nevus almost 100%). Application Treatment advantage (1) High energy & short pulse duration: Energy can be released into the skin tissue in trillions of trillions of seconds, which can break down the pigment into smaller pieces. Compared with the traditional Q: switch laser, the pigment can be absorbed more easily and faster. (2) Low risk & painless: Since the pulse duration has been reduced a thousand times, skin damage has been reduced. Treatment is safer and less painful. (3) There was no anesthesia and inflammation during the treatment. (4) Fast： For tattoo removal, traditional Q: switching lasers usually require 6-8 treatments. With a picosecond laser, only 3-4 treatments are needed to completely remove it. (5) High performance: Using picosecond laser technology can completely remove tattoos and pigments. (6) Try any skin type, no obvious pigmentation after treatment. Laser type Pico second ND: YAG Laser Energy Level Single Mode: Max 400mj (532nm), Max 800mj (1064nm) Double Mode:Max 800mj(532nm), Max 1600mj (1064nm) Pulse width 750ps wavelength 1064nm,532nm,585nm(option),650nm(option) Frequency 1-10hz Spot size 2-10mm Dimension 107*50*118CM weight 115KG   Postoperative care 1.After treatment, there may be slight pain, white skin surface, epidermal bleeding, transient redness, swelling, blackening or even purpura. They can be absorbed by themselves without being too nervous.If there is a scab that will fall off on its own within 7--14 days, it should not be removed artificially, so as to avoid delaying skin healing and forming pigmentation. 2.Due to individual differences or climate changes, within a few days after treatment, the treatment area must not be in direct contact with water or other solutions to prevent infection. Try to eat less spicy food, excessive drinking, and smoking. 3.Very few individuals may have pigmentation on their skin after treatment, which usually subsides after 1-3 months. 4.After the operation, try to avoid activities in the sun and exposure, in order to avoid the production and increase pigmentation. Physical sunscreen works best 5.If any abnormal phenomenon is found after the operation, please go to the outpatient consultation and treatment in time. Exhibition Factory and delivery                    Sunny Zhao                          Daria Jia     Sunny@sanhebeauty.com   daria@sanhebeauty.net              +86 18813196949                    +86-18831450595

808nm laser 650nm laser hair loss treatment machine with LLLT technology LLLT Laser Hair Growth Treatment- laser hair loss treatment with Sano laser Androgenetic alopecia is the most common cause of hair loss in both men and women, and a hereditary condition which causes hair follicles to shrink and become dormant, eventually stopping hair growth all together. LLLT can also be used to treat other forms of alopecia and hair loss that stems from causes such as chemotherapy or severe hair loss that may occur in women after pregnancy or menopause. It is also frequently used to complement other hair loss treatments such as PRP therapy and can be particularly effective in conjunction with hair transplant procedures. Results with LLLT have also shown to be even more beneficial than medications over the short-term. The feature of this machine: 1.Five kinds of wavelength (808nm，650nm，630nm，580nm, 460nm ). 2.Lasers and LED cold laser mixed in one helmet. Most of the laser hair regrowth machine in the market only has the 650nm laser. Or only LED. But our SH650-1 hair regrowth system combines two kinds of lasers and 3 kinds of LED. 3. Laser and LED lights are imported from Japan. We use higher quality Japanese laser and LED light. Energy is stable, lifetime is longer. 4.Oxygen spray pen. Used for clean and sterilize scalp. 5.Medicine spray pen. It can help the hair regrowth medicine like Minoxidil average on the scalp. 6.Micro-current massage comb. To help medicine absorbed faster, and do massage to the scalp. 7.Professional hair & Scalp analyzer. It can do the analysis for hair and scalp, save 2000 patients’ information, before and after photos (It has a camera to take photos), and print analysis report. 8. The system is very easy to operate. The work time for the 5 wavelengths is adjusted separated. Most the machine in the market has no Medicine spray pen, Micro-current comb, Oxygen sprayer, also no Hair& Scalp analyzer. How LLLT Works The laser light that’s used in LLLT produces a particular wavelength, which has a unique ability to be absorbed by the molecules of the hair follicles. The light helps to shift hair follicles into the growth stage in multiple ways. When it penetrates the scalp, it stimulates the stem cells responsible for the regeneration of the hair follicles, encouraging hair regrowth. It also works to increase the production of ATP and the metabolic process of the cells for faster hair growth. The light acts to increase blood flow in the targeted region of the scalp, therefore increasing the delivery of nutrients and oxygen to the hair follicles, causing the hair to grow with greater length and diameter. This helps to produce thicker hair shafts and results in fuller looking hair overall. LLLT Devices and Treatment A variety of methods can be used to administer LLLT. Therapies can be administered in an in-office setting via hoods or overhead panels. Popular products include laser combs, which are devices that emits LLLT similar to a hair brush, helmets, are also among the most common. It may be an even better idea to consider consult a medical professional that specializes in hair restoration and hair loss treatments. That’s us here at Beijing Sano Laser Company. If you’re considering LLLT for hair loss or wondering if it’s a treatment option that’s right for you, give us a call. We can discuss the different therapies, procedures, and products that may be most effective for your individual case. And find real help for hair loss. Contact with us: Contact Person: Alex Song, Sunny Zhao E-mail: Alex@sanolasers.com   Sunny@sanhebeauty.net Whatsapp: +86 15321516360    +86 18813196949

4 cryo handles Cryolipolysis slimming machine fat reduction body shaping This procedure can reduce unwanted abdominal fat, love handles (flanks), and back fat. When fat cells are exposed to precise cooling, they trigger a process of natural removal that gradually reduces the thickness of the fat layer. And the fat cells in the treated area are gently eliminated through the body’s normal metabolism process, to eliminate unwanted fat. Through the freezing effect, remove the fat cell triglyceride off heat, and will remain at 4 ℃, so the cold coagulation, and therefore premature aging and death. Fat cells in the cold, will start clearing the natural decomposition process, so that gradually thinner fat layer. Through the normal metabolic processes, decreasing the fat layer, to achieve the purpose of partial melting fat. Fat cells can be significantly reduced, the fat layer also will become thinner, so that the fat blocks will be killed one by one. Cooling Skin protection while lifting and tightening. The contact cooling of the handpiece surface regulates the temperature of the skin and protects fine dermal structures, realizing the fast body-reshape effects while tightening skin! System Advantages Double touch screen Controls:  10.4 inch multi color touch screen controlling on main body 4.2 inch multi color touch screen control on hand piece Data based working program: According to the fat thicknees and heart rate measured before treatment, The fixed  treatment parameter setting is suggested. Also the parameter can be changed by operator Hand hold Emergency off button: For avoiding patient uncompfortable reaction, the patient can shut down the treatment immidiately by hand hold emergency off button. Heart rate meter: Test the heart rate before the treatment to make sure the patient is safe for accepting the cryolipolysis treatment. Hear rate lower than 50 and higher than100 is not suitable for the treatment. Supper strong cooling system: 1000w semicongductor cooling system to make sure the temperator              is dedicating control and lower enough for best result. Software vacuum control:  dedicating and adjustable vacuum control to make sure the treatment more safe and effective. Special designed program: Heat up the tissue with fixed time before cryolipo treatment start to avoid treatment area swelling seriously.   Indications The system can be treated: Body shaping: Shaping of the four limbs, buttocks, abdomen, recovery of Postpartum and liposuction surgery. Stretch marks: eliminate stretch marks efficiently Body sliming: reduce the cellulite, reduce the fat, improve skin laxity Contra-indication Pregnant woman The patient who has the heart bypass surgery. Heart disease Hypertension   Contact with us: Contact Person: Alex Song, Sunny Zhao E-mail: Alex@sanolasers.com   Sunny@sanhebeauty.net Whatsapp: +86 15321516360    +86 18813196949  

effective result Microneedling rf fractional rf machine Application * Deep wrinkle removal, skin tightening * Pigment and acne treatment * Lighten the scar or acne scar, make pore smaller * Skin rejuvenation * Lighten stretch marks Product Description Specifications Of Fractional RF Micro Needling Machine  Type MRF+SRF Screen 10 ' Color TFT LCD Input Power 50W Output Frequency 2MHz Output Wavelength PDT 650nm Cryo Temperature -5 degree Fractional RF Microneedle Type SRF(Superficial Fractional RF) MRF  (Microneedle Fractional RF) High speed SRF---No pinLow gear SRF---No pin High speed MRF ---81pin,49pin,25pinLow gear MRF---81pin,49pin,25pin Relative humidity range lower 93% Atmostheric pressurer range 50KPa-106KPa Dimension  480mm x 295mm x 1060mm Weight  30kg Technology Advantages 1. Tips species Three kinds of microneedle tips (MRF): 25pin/ 49pin/ 81pin. One kind of superficial RF tip (SRF): 25 dot matrix tip, non-invasive. 2. Needles shooting system Automatic needles,can make the RF energy better distributed in dermis, so patients can get better treatment result. 3. Gold Plating Needle is durable and also has high Biocompatibility by applying Gold Plating. Patient with metal allergy could also use it with not concerning Contact Dermatitis. 4. Needle Depth Control : 0.5~3 mm Operates epidermis layer and dermis layer by controlling the needle depth in unit of 0.1 mm 5. Safety Needle System -Sterilized disposable needle tip -Operator can easily notice the applying RF energy from a red light 6. Needle Thickness Min: 0.01 mm The needle structure is easy to penetrate the skin with minimum resistance. 7. Without Pigment The energy of RF plays a role in dermis directly, therefore, there is no heat summation on the dermis to avoid the possibility of blister and pigment precipitation problems. 8. Without Side Effect The recovery time is short, such as Red face will be decreased in 1~2 days, the Cutin will be dropped within 3~4 days. It won't affect the daily life after treatment. and the patient can clean face and make up directly after operation as usually. 9. Two Treatment Methods There are two treatment ways with Dual Matrix tip and RF Micro needle tip to meet the needs of different clients. Contact with us: Contact Person: Alex Song, Sunny Zhao E-mail: Alex@sanolasers.com   Sunny@sanhebeauty.net Whatsapp: +86 15321516360    +86 18813196949

Working principle According to the principle of selective photopyrolysis, when shorted the action time of the laser, the laser energy diffuses less to the surrounding tissue. If the energy is limited to the target that needs treatment, the surrounding normal tissue can be protected, so the selectivity of treatment become stronger.The picosecond laser pulse width is only 1% of the traditional Q-switched laser. Under this ultra-short pulse width, the light energy is too late to be converted into heat energy, and there is almost no photothermal effect.When the laser energy is absorbed by the target, its volume will expand rapidly, and then be blasted and torn into pieces. "The picosecond laser is more powerful and complete in crushing pigment particles and less damaging the surrounding tissue." From the perspective of treatment, the effective rate can reach more than 94% (Ota nevus almost 100%). Application 1. Freckles, sunburn, age spots, chloasma, liver spots, dermal spots, etc. 2. Skin rejuvenation and whitening, narrow pores 3. Uneven skin tone 4. Acne marks 5. Red and black moles 6. Tattoos, red and blue eyebrows tattoo Treatment advantage (1) High energy & short pulse duration: Energy can be released into the skin tissue in trillions of trillions of seconds, which can break down the pigment into smaller pieces. Compared with the traditional Q: switch laser, the pigment can be absorbed more easily and faster. (2) Low risk & painless: Since the pulse duration has been reduced a thousand times, skin damage has been reduced. Treatment is safer and less painful. (3) There was no anesthesia and inflammation during the treatment. (4) Fast： For tattoo removal, traditional Q: switching lasers usually require 6-8 treatments. With a picosecond laser, only 3-4 treatments are needed to completely remove it. (5) High performance: Using picosecond laser technology can completely remove tattoos and pigments. (6) Try any skin type, no obvious pigmentation after treatment. Laser type Pico second ND: YAG Laser Energy Level Single Mode: Max 400mj (532nm), Max 800mj (1064nm) Double Mode:Max 800mj(532nm), Max 1600mj (1064nm) Pulse width 750ps wavelength 1064nm,532nm,585nm(option),650nm(option) Frequency 1-10hz Spot size 2-10mm Dimension 107*50*118CM weight 115KG   Postoperative care 1.After treatment, there may be slight pain, white skin surface, epidermal bleeding, transient redness, swelling, blackening or even purpura. They can be absorbed by themselves without being too nervous.If there is a scab that will fall off on its own within 7--14 days, it should not be removed artificially, so as to avoid delaying skin healing and forming pigmentation. 2.Due to individual differences or climate changes, within a few days after treatment, the treatment area must not be in direct contact with water or other solutions to prevent infection. Try to eat less spicy food, excessive drinking, and smoking. 3.Very few individuals may have pigmentation on their skin after treatment, which usually subsides after 1-3 months. 4.After the operation, try to avoid activities in the sun and exposure, in order to avoid the production and increase pigmentation. Physical sunscreen works best 5.If any abnormal phenomenon is found after the operation, please go to the outpatient consultation and treatment in time. Treatment Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service.                     Sunny Zhao                           Daria Jia     Sunny@sanhebeauty.com     Daria@sanhebeauty.net           +86 18813196949                    +86-18831450595

Functions P-MIX 755 808 1064nm Diode laser hair removal machine is mainly used for professional hair removal. Such as permanently remove lip hair, beard hair, chest hair, armpit hair, limbs hair and unwanted hair on any parts of body. It is suitable for all skin and hair types. the P-MIX combine 3 wave laser well. Each wave have its advantage: The 755nm used for light hair and blond hair removal. The 808nm have a good result for most skin types and hair colors. The 1064nm is suitable for black skin hair removal. Specifications:  Laser type High Intensity 808nm diode laser Laser handle output power 1200W Total power 3200W Laser wavelength 755+808+1064nm Sapphire size (Spot size) 12*12mm Shots Guarantee 2 years no limited Treatment head temperature Max -16 degree Frequency 1-10 Hz Display 10.4 Inch Package size 82*55*120CM Gross weight 82 KG Advantages: 1.USA Imported coherent laser bar is more stable. And 1200W high power output laser energy can achieve the best hair removal. 2.Low investment and high return. The treatment head is guaranteed for 2 years with No limitation. 3.The constant temperature refrigeration module keeps the water temperature at about 20-25 degrees, which can ensure the system to work continuously for 48hours without stop. 4.Using advanced TEC and sapphire contact cooling technology, the terminal temperature is controlled under 5 ° C, and the skin is properly cooled during the hair removal process, while ensuring the possibility of zero frostbite. 5.The frequency reaches 10hz, the treatment is more fast. Certificate: FDA, Medical CE Machine in treatment:  Before and after treatment photos: Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service. Contact with us: Contact Person: Alex Song, Sunny Zhao E-mail: Alex@sanolasers.com   Sunny@sanhebeauty.com Whatsapp: +86 15321516360    +86 18813196949

Working Theory Through HI-EMT (high energy focused electromagnetic wave) technology, autologous muscles can realize the ultimate training of continuous expansion and contraction, so as to deeply reshape the internal structure of muscles. It promotes the growth of myofibrils (muscle enlargement) to produce new protein chains and muscle fibers (muscle hyperplasia) and increases muscle density and volume through training Function Exercise abdominal muscles and build waistline; Exercise buttock muscle, make honey peach buttock; Exercise the oblique abdominal muscles and shape the fishing line. Advantage 1.Building muscles and burn fat together 2.Non-invasive hip lifting 3.Suitable for everyone-no anesthesia-no surgery 4. Short-term treatment, one time 30 minutes 5.Only 4 sessions are required between 2-3 days 6.Feels like an intensive exercise 7.Safe without downtime 8. The result is immediate, but it will be noticeable after two to four weeks. 9. Muscle mass increased by an average of 16%. Average fat loss 19% Before and after picture Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service. Contact with us:  Contact Person: Sunny Zhao, Daria Jia E-mail: Sunny@sanhebeauty.com,   Daria@sanhebeauty.net Whatsapp: +86 18813196949  +86 18831450595

Working principle According to the principle of selective photopyrolysis, when shorted the action time of the laser, the laser energy diffuses less to the surrounding tissue. If the energy is limited to the target that needs treatment, the surrounding normal tissue can be protected, so the selectivity of treatment become stronger.The picosecond laser pulse width is only 1% of the traditional Q-switched laser. Under this ultra-short pulse width, the light energy is too late to be converted into heat energy, and there is almost no photothermal effect.When the laser energy is absorbed by the target, its volume will expand rapidly, and then be blasted and torn into pieces. "The picosecond laser is more powerful and complete in crushing pigment particles and less damaging the surrounding tissue." From the perspective of treatment, the effective rate can reach more than 94% (Ota nevus almost 100%). Application Treatment advantage (1) High energy & short pulse duration: Energy can be released into the skin tissue in trillions of trillions of seconds, which can break down the pigment into smaller pieces. Compared with the traditional Q: switch laser, the pigment can be absorbed more easily and faster. (2) Low risk & painless: Since the pulse duration has been reduced a thousand times, skin damage has been reduced. Treatment is safer and less painful. (3) There was no anesthesia and inflammation during the treatment. (4) Fast： For tattoo removal, traditional Q: switching lasers usually require 6-8 treatments. With a picosecond laser, only 3-4 treatments are needed to completely remove it. (5) High performance: Using picosecond laser technology can completely remove tattoos and pigments. (6) Try any skin type, no obvious pigmentation after treatment. Laser type Pico second ND: YAG Laser Energy Level Single Mode: Max 400mj (532nm), Max 800mj (1064nm) Double Mode:Max 800mj(532nm), Max 1600mj (1064nm) Pulse width 750ps wavelength 1064nm,532nm,585nm(option),650nm(option) Frequency 1-10hz Spot size 2-10mm Dimension 107*50*118CM weight 115KG   Postoperative care 1.After treatment, there may be slight pain, white skin surface, epidermal bleeding, transient redness, swelling, blackening or even purpura. They can be absorbed by themselves without being too nervous.If there is a scab that will fall off on its own within 7--14 days, it should not be removed artificially, so as to avoid delaying skin healing and forming pigmentation. 2.Due to individual differences or climate changes, within a few days after treatment, the treatment area must not be in direct contact with water or other solutions to prevent infection. Try to eat less spicy food, excessive drinking, and smoking. 3.Very few individuals may have pigmentation on their skin after treatment, which usually subsides after 1-3 months. 4.After the operation, try to avoid activities in the sun and exposure, in order to avoid the production and increase pigmentation. Physical sunscreen works best 5.If any abnormal phenomenon is found after the operation, please go to the outpatient consultation and treatment in time. Exhibition Factory and delivery                    Sunny Zhao                          Daria Jia     Sunny@sanhebeauty.com   daria@sanhebeauty.net              +86 18813196949                    +86-18831450595