Tighten and firm your skin - Microneedle RF face lifting machine Application * Remove wrinkle, skin tightening * Pigment and acne treatment * Lighten the scar or acne scar, make pore smaller * Skin rejuvenation, make skin more lighten and smooth * Lighten stretch marks       Stimulates new collagen production to not only give you tighter, firmer-looking skin,* but younger-acting skin     Targets blemishes for a smoother, more radiant complexion     Provides faster healing time than traditional microneedling Features:   1. Pinxel-2 has four handles, Fractional RF handle (Non-invasive), Micro-needle RF handle (invasive), a cooling head, and a negative polar. 2. This machine is used for acne, scar, wrinkle, pigmentation removal, Skin Resurfacing, Large Pore Reduction and skin rejuvenation, face lifting, skin tightening. 3: This machine has Bipolar mode and Mono-polar mode two treatment mode, Most of China RF machine only has bi-polar mode. In Mono-polar mode, the RF energy is stronger. If using Mono-polar mode, the patient need to hold the negative polar handpiece Advantages: 1: It has insulated and non-insulated needle tips, two needle types for the doctor to choose. (25 pins insulated, 25 pins non-insulated, 49 insulated and 49 pins non-insulated needle tip) 2: The depth of the needle are adjustable on screen, 0.5mm-3mm. 0.5-1.0mm used for eye around, 1.0-2.0mm used for face treatment. 2.0-3.0mm used for body treatment. 3: There are 25 pins, 49 pins needle tips, insulated tips and non-insulated tips. 4: It uses Korea imported step motor. The needles are stronger, can come into skin more easily. In China, only Sanhe use this kind of motor. 5: It has a cooling head. Used for after-treatment care. Most other similar machines have no cooling head Contact with us: Contact Person: Alex Song, Sunny Zhao E-mail: Alex@sanolasers.com   Sunny@sanhebeauty.net Whatsapp: +86 15321516360    +86 18813196949

Microneedle Machine Rf MFR SFR Microneedle Fractional Machine Intracel Rf Micro Needling SFR Collagen Induction Therapy Unique dual channels of SFR noninvasively delivers RF energy to the Epidermis and superfical dermis with synergistic effect,resulting in luminous skin and controlled tightening. Wound Healing Mechanisms by RF energy Since Micro-needles are insulated except the edge part (0.3mm), Micro-needle electrodes deliver bipolar energy directly deep into dermis without damage in epidermis.   Minimally invasive RF thermal energy creates fractional electrocoagulation in dermis which facilitate natural Wound Healing Process. WHM promote the remodeling of collagen and wound contraction, which enhance skin laxity. Not only stimulate dermal remodeling but also RF inhibit sebaceous gland activity to improve acne. Improved Outcomes Fractional rf microneedle consistent, even thermal distribution ensures more consistent results and improved outcomes. Microneedle tracks and thermal distribution of RF energy in the skin phantom model for the 3 mm depth with different exposure times as shown (in seconds). Images were captured immediately after withdrawal of the microneedles. Contact with us: Contact Person: Alex Song, Sunny Zhao E-mail: Alex@sanolasers.com   Sunny@sanhebeauty.net Whatsapp: +86 15321516360    +86 18813196949

Micro needle RF&Fractional RF machine for skin care Application * Remove wrinkle, skin tightening * Pigment and acne treatment * Lighten the scar or acne scar, make pore smaller * Skin rejuvenation, make skin more lighten and smooth * Lighten stretch marks Product Description Specifications Of Fractional RF Micro Needling Machine  Type MRF+SRF Screen 10 ' Color TFT LCD Input Power 50W Output Frequency 2MHz Output Wavelength PDT 650nm Cryo Temperature -5 degree Fractional RF Microneedle Type SRF(Superficial Fractional RF) MRF  (Microneedle Fractional RF) High speed SRF---No pinLow gear SRF---No pin High speed MRF ---81pin,49pin,25pinLow gear MRF---81pin,49pin,25pin Relative humidity range lower 93% Atmostheric pressurer range 50KPa-106KPa Dimension  480mm x 295mm x 1060mm Weight  30kg Technology Advantages 1. Tips species Three kinds of microneedle tips (MRF): 25pin/ 49pin/ 81pin. One kind of superficial RF tip (SRF): 25 dot matrix tip, non-invasive. 2. Needles shooting system Automatic needles,can make the RF energy better distributed in dermis, so patients can get better treatment result. 3. Gold Plating Needle is durable and also has high Biocompatibility by applying Gold Plating. Patient with metal allergy could also use it with not concerning Contact Dermatitis. 4. Needle Depth Control : 0.5~3 mm Operates epidermis layer and dermis layer by controlling the needle depth in unit of 0.1 mm 5. Safety Needle System -Sterilized disposable needle tip -Operator can easily notice the applying RF energy from a red light 6. Needle Thickness Min: 0.01 mm The needle structure is easy to penetrate the skin with minimum resistance. 7. Without Pigment The energy of RF plays a role in dermis directly, therefore, there is no heat summation on the dermis to avoid the possibility of blister and pigment precipitation problems. 8. Without Side Effect The recovery time is short, such as Red face will be decreased in 1~2 days, the Cutin will be dropped within 3~4 days. It won't affect the daily life after treatment. and the patient can clean face and make up directly after operation as usually. 9. Two Treatment Methods There are two treatment ways with Dual Matrix tip and RF Micro needle tip to meet the needs of different clients. Contact with us: Contact Person: Alex Song, Sunny Zhao E-mail: Alex@sanolasers.com   Sunny@sanhebeauty.net Whatsapp: +86 15321516360    +86 18813196949

Working Therapy & Functions I-Cool Skin air cooler is intended to minimize pain and thermal injury during laser and dermatological treatments. It also provides temporary topical anesthetic relief during injections, tattoo application, tattoo removal, RF, laser hair removal and much more.  The device can assist in a variety of applications and is particularly useful with cosmetic procedures. Aesthetic skin air cooling system: Enjoy more comfortable laser treatment Power cooling air temperature -30degree Cool skin to numbness Avoid thermal injury 3 iointed supporter for convenient operation Minimize pain and ensure a better result during laser and rf treatment Laser source: Stormfiber-II air cooling system Controlling screen: 2.4 inch multi color screen Cooling power: 1500W Temperature range: -4℃~-30℃(adjustable) Refrigerants: R404A Fan speed: 1~8 level (adjustable) Treatment Pipe: 2.5m Pipe weight: 200g Outlet adaptor size: Φ6mm  Φ10mm  10mm*1.5mm LCD Screen: 2.4 Inch Storage platform size: 450*280*20mm Machine size: 610*380*750mm    50KG Package size: 820-500-930mm    74KG Power source: AC/100-240 V, 50-60 Hz，10A Safety Class: EN60601-1,TypeB MDD/MPG,Class I  System interface Introduction Wind speed: OFFLevel 0 temperature display：-4℃~-30℃ Adjustable Adapters for Diode laser and IPL Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service. Contact with us:  Contact Person: Sunny Zhao, Alex Song E-mail: Sunny@sanhebeauty.com,   Alex@sanolasers.com Whatsapp: +86 18813196949  +86 15321516360

Microneedle RF non-invasive Fractional rf machiine Application * Remove wrinkle, skin tightening * Pigment and acne treatment * Lighten the scar or acne scar, make pore smaller * Skin rejuvenation, make skin more lighten and smooth * Lighten stretch marks Product Description Specifications Of Fractional RF Micro Needling Machine  Type MRF+SRF Screen 10 ' Color TFT LCD Input Power 50W Output Frequency 2MHz Output Wavelength PDT 650nm Cryo Temperature -5 degree Fractional RF Microneedle Type SRF(Superficial Fractional RF) MRF  (Microneedle Fractional RF) High speed SRF---No pinLow gear SRF---No pin High speed MRF ---81pin,49pin,25pinLow gear MRF---81pin,49pin,25pin Relative humidity range lower 93% Atmostheric pressurer range 50KPa-106KPa Dimension  480mm x 295mm x 1060mm Weight  30kg Technology Advantages 1. Tips species Three kinds of microneedle tips (MRF): 25pin/ 49pin/ 81pin. One kind of superficial RF tip (SRF): 25 dot matrix tip, non-invasive. 2. Needles shooting system Automatic needles,can make the RF energy better distributed in dermis, so patients can get better treatment result. 3. Gold Plating Needle is durable and also has high Biocompatibility by applying Gold Plating. Patient with metal allergy could also use it with not concerning Contact Dermatitis. 4. Needle Depth Control : 0.5~3 mm Operates epidermis layer and dermis layer by controlling the needle depth in unit of 0.1 mm 5. Safety Needle System -Sterilized disposable needle tip -Operator can easily notice the applying RF energy from a red light 6. Needle Thickness Min: 0.01 mm The needle structure is easy to penetrate the skin with minimum resistance. 7. Without Pigment The energy of RF plays a role in dermis directly, therefore, there is no heat summation on the dermis to avoid the possibility of blister and pigment precipitation problems. 8. Without Side Effect The recovery time is short, such as Red face will be decreased in 1~2 days, the Cutin will be dropped within 3~4 days. It won't affect the daily life after treatment. and the patient can clean face and make up directly after operation as usually. 9. Two Treatment Methods There are two treatment ways with Dual Matrix tip and RF Micro needle tip to meet the needs of different clients. Contact with us: Contact Person: Alex Song, Sunny Zhao E-mail: Alex@sanolasers.com   Sunny@sanhebeauty.net Whatsapp: +86 15321516360    +86 18813196949

Micro needle RF&Fractional RF machine for skin care Application * Remove wrinkle, skin tightening * Pigment and acne treatment * Lighten the scar or acne scar, make pore smaller * Skin rejuvenation, make skin more lighten and smooth * Lighten stretch marks Product Description Specifications Of Fractional RF Micro Needling Machine  Type MRF+SRF Screen 10 ' Color TFT LCD Input Power 50W Output Frequency 2MHz Output Wavelength PDT 650nm Cryo Temperature -5 degree Fractional RF Microneedle Type SRF(Superficial Fractional RF) MRF  (Microneedle Fractional RF) High speed SRF---No pinLow gear SRF---No pin High speed MRF ---81pin,49pin,25pinLow gear MRF---81pin,49pin,25pin Relative humidity range lower 93% Atmostheric pressurer range 50KPa-106KPa Dimension  480mm x 295mm x 1060mm Weight  30kg Technology Advantages 1. Tips species Three kinds of microneedle tips (MRF): 25pin/ 49pin/ 81pin. One kind of superficial RF tip (SRF): 25 dot matrix tip, non-invasive. 2. Needles shooting system Automatic needles,can make the RF energy better distributed in dermis, so patients can get better treatment result. 3. Gold Plating Needle is durable and also has high Biocompatibility by applying Gold Plating. Patient with metal allergy could also use it with not concerning Contact Dermatitis. 4. Needle Depth Control : 0.5~3 mm Operates epidermis layer and dermis layer by controlling the needle depth in unit of 0.1 mm 5. Safety Needle System -Sterilized disposable needle tip -Operator can easily notice the applying RF energy from a red light 6. Needle Thickness Min: 0.01 mm The needle structure is easy to penetrate the skin with minimum resistance. 7. Without Pigment The energy of RF plays a role in dermis directly, therefore, there is no heat summation on the dermis to avoid the possibility of blister and pigment precipitation problems. 8. Without Side Effect The recovery time is short, such as Red face will be decreased in 1~2 days, the Cutin will be dropped within 3~4 days. It won't affect the daily life after treatment. and the patient can clean face and make up directly after operation as usually. 9. Two Treatment Methods There are two treatment ways with Dual Matrix tip and RF Micro needle tip to meet the needs of different clients. Contact with us: Contact Person: Alex Song, Sunny Zhao E-mail: Alex@sanolasers.com   Sunny@sanhebeauty.net Whatsapp: +86 15321516360    +86 18813196949

Working principle According to the principle of selective photopyrolysis,the shorter the laser's working time, the less energy the laser energy accumulated in the target tissue will spread to the surrounding tissue. The energy is limited on the target area to be treated, and the surrounding normal tissue is protected, so the selectivity of the treatment is improved and strong.The pulse width of the picosecond laser is only one-hundredth of that of the traditional Q-switched laser. Under this ultra-short pulse width, the light energy is too late to be converted into heat energy, and almost no photothermal effect occurs. The volume of the laser beam is rapidly expanded after being absorbed by the target, and rapidly being torn into pieces by blasting.The damage caused is smaller and the number of treatments is shorter, resulting in stronger efficacy. The rapid shock wave time of the Picosecond mechanical laser is superior to the general laser speed. The probability of thermal damage to the skin is greatly reduced, and the risk of stimulating melanin hyperplasia (anti-black) is also reduced. If we compare the original pigment particles to rocks, the traditional Q-switched laser can crush these rocks to the size of pebbles, and the picosecond laser can crush them to fine sand, so that the absorption efficiency of pigment fragments Greatly improved. Indications Freckles, sunburn, age spots, chloasma, liver spots, dermal spots, etc. Skin rejuvenation and whitening, narrow pores Uneven skin tone Acne marks Red and black moles Tattoos, red and blue eyebrows tattoo Power 2000W Laser wavelength 1064nm, 532nm  Laser output 100- 800mj Pulse width 2000ps Frequency 1-20Hz adjustable Spot size Φ1-5mm Guiding red light 650nm Cooling system Water cooling+semiconductor cooling +air cooling Power requirement AC220V±10%  50HzAC110V±10%  60Hz Dimension 65×50×45cm Weight 94*60*62CM Net weight 33Kg Gross weight 51Kg Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service. Alex Song                        Sunny Zhao                           Ruby Mu Alex@sanolasers.com     Sunny@sanhebeauty.com    ruby@sanhebeauty.net   +86 15321516360            +86 18813196949                    +86-17633631496

sano Microneedling RF platform face lifting skin rejuvenation Microneedle RF Pinxel-2 RF Microneedling is the world’s first RF microneedling platform. With the ability to add multiple handpieces*, Pinxel-2 RF offers more versatility than other leading RF Microneedling products. Designed to maximize patient efficacy, experience and your business, Pinxel-2 RF boasts advanced ergonomic, interface, safety and treatment delivery features. Pinxel-2 RF is manufactured by the global leader in RF microneedling technology From the SmartRF handpiece’s , to the exclusive post-treatment protocol, the comfort, results and unique experience your patients can expect from Pinxel-2 RF microneedling are unmatched. The 25 or 49 gold-coated needles of the Smart RF are precisely delivered at a specified depth to provide immediate results with continued improvement over time and a virtually painfree, zero social downtime treatment. Only the Pinxel-2 RF pairs every treatment with the most innovative sheet mask technology available – the Microcurrent Dual Face Mask system. This two mask system soothes skin and eliminates redness. After the pinxel-2 RF treatment, a wet enriching Mask infused with antioxidants, vitamins, moisturizing and anti-inflammatory properties is applied to the skin. Contact with us: Contact Person: Alex Song, Sunny Zhao E-mail: Alex@sanolasers.com   Sunny@sanhebeauty.net Whatsapp: +86 15321516360    +86 18813196949

Working Theory High Intense Focused Ultrasound is the newest technology for weight loss, which is comparable with liposuction. Meanwhile it is more safe and painless than Liposuction. HIFU head can delivers the HIFU energy to the specific depth of the subcutaneous tissue layer.The energy after conduction through the mechanical, cavitation and thermal effects , can destroy the fat cells. Then by limiting the energy value, conduction distance and machine's power. Making only low density of fat cells are easy to be damaged，And the target area and the surrounding tissue, such as: skin, blood vessels, nerves and connective tissue, etc. will not be harmed. This result is also confirmed by histological examination——Fat cells dissolved, meantime the surrounding tissue did not appear damage.The body destroy and excluded the fat cells through the metabolism from the body, so as to achieve weight loss, body sculpting effect. Advantages （1）230khz HIFU and do the treatment on Abdomen, thighs and Buttocks； （2）Single Pulse Mode：Adjustable Energy；Easy to Operate； （3）Water cycle cooling System: energy conversion fast, no hot water circulation； （4）HIFU head is made of special materials: can ensure the energy work on the fat cells accurately and completely;Special cooling gel conduction：Which can penetrate the fat cells quickly； （5）Precise energy setting: penetration depth control (maximum 1.2cm), It is more safe for adipose tissue and dissolved fat, safer;40kHz can reduce the fat on arms legs and buttocks； （6）2MHz Bi-polar rf had can be used for face lift；  (7)Cooling head can do the semi-conduction cooling after and before treatment Main interface: SaluShape body slimming and face lifting machine Specification andle type Frequency Energy level Treatment mode Tip size Focused ultrasound 230khz 1-30 degree pulse mode D42mm Ultrasound cavitation 40khz 1-10 degree Continuous mode D50mm Bipolar RF 2Mhz 1-30 degree Continuous mode D8mm, Distance:15mm Input Power 400W Focus Depth 12mm Cooling head temperature -5°C-5°C Treatment life span of handpiece 500,000 shots Machine size 550X360X1175mm Package dimension 705*515*1130mm Machine weight 38kg Package weight 63kg Power requirements 110V-240V,10A single phase Environmental requirements +15C-30C, 80% humidity   SaluShape Body Slimming And Face Lifting Machine effect Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service. Contact with us:  Contact Person: Sunny Zhao, Daria Jia E-mail: Sunny@sanhebeauty.com,   Daria@sanhebeauty.net Whatsapp: +86 18813196949  +86 18831450595

Indications Freckles, sunburn, age spots, chloasma, liver spots, dermal spots, and other stubborn spots Skin rejuvenation and whitening, narrow pores Uneven skin tone，whitening, skin rejuvenation Acne marks，scars Red and black moles，birthmarks Tattoos, red and blue pigmentation ，eyebrows tattoo Picosecond nd yag laser system principle: The picosecond laser uses trillions of seconds of powerful laser energy to grind the pigment in the skin tissue to achieve the effect of completely removing tattoos and various skin pigments. Through specialized fractional lenses, picosecond lasers can convert laser energy into gentle pressure that produces new collagen by squeezing cells and activating native cells without burning or damaging the skin Operation Steps 1、Clean the treatment area, if you have hair, you need to remove it 2、Apply anesthetic cream as needed 3、Disinfect the treatment area 4、Adjust the treatment parameters according to the parameter table 5、All treatments are recommended not to break the skin or ooze blood, which can greatly reduce the risk of melanin deposition, and the number of treatments will increase accordingly. When starting treatment, use low frequency first (let the machine warm up first to reduce the damage to the machine), and slowly close to the skin to continuously emit light. Then slowly raise up to find a suitable distance to start treatment. After a few minutes, you can increase the frequency. When you start treatment, you must first get close to the skin to continuously emit light, and then slowly raise the treatment head, so as to avoid the sound from scaring the patient It can also find the best treatment distance. When the blasting sound is the loudest, it is when the energy is focused. In many cases, the focused energy is not used, because the focused energy will bleed, and the probability of coloration is very large. Generally 2 minutes after treatment The skin will flush and the effect is best. Focusing on energy: The point with the greatest energy can be judged by listening to the sound, and the point where the sound is the loudest and the most brittle can be understood by beginners. 6.It is recommended to use repair products and products that inhibit pigmentation after treatment 7.After treatment, you must enter physical sunscreen, masks, umbrellas, etc. 8.The general treatment interval is about one month, the parameter table has the recommended number of treatments, and the doctor determines whether to add treatment according to the patient's recovery. Laser type Pico second ND: YAG Laser Energy Level Single Mode: Max 400mj (532nm), Max 800mj (1064nm) Double Mode:Max 800mj(532nm), Max 1600mj (1064nm) Pulse width 750ps wavelength 1064nm,532nm,585nm(option),650nm(option) Frequency 1-10hz Spot size 2-10mm Dimension 107*50*118CM weight 115KG   Postoperative care 1.After treatment, there may be slight pain, white skin surface, epidermal bleeding, transient redness, swelling, blackening or even purpura. They can be absorbed by themselves without being too nervous.If there is a scab that will fall off on its own within 7--14 days, it should not be removed artificially, so as to avoid delaying skin healing and forming pigmentation. 2.Due to individual differences or climate changes, within a few days after treatment, the treatment area must not be in direct contact with water or other solutions to prevent infection. Try to eat less spicy food, excessive drinking, and smoking. 3.Very few individuals may have pigmentation on their skin after treatment, which usually subsides after 1-3 months. 4.After the operation, try to avoid activities in the sun and exposure, in order to avoid the production and increase pigmentation. Physical sunscreen works best 5.If any abnormal phenomenon is found after the operation, please go to the outpatient consultation and treatment in time. Treatment Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service. bertha zhou sanhebertha@gmail.com +8618875757207

P-MIX 755 808 1064nm Diode laser hair removal machine is mainly used for professional hair removal. Such as permanently remove lip hair, beard hair, chest hair, armpit hair, limbs hair and unwanted hair on any parts of body. It is suitable for all skin and hair types. Specifications:  Laser type High Intensity 808nm diode laser Laser handle output power 2000W Total power 4000W Laser wavelength 755+808+1064nm Sapphire size (Spot size) 12*23mm Shots Guarantee 2 years no limited Treatment head temperature Max -16 degree Frequency 1-10 Hz Display 10.4 Inch Package size 82*55*120CM Gross weight 82 KG Advantages: 1.USA Imported coherent laser bar is more stable. And 1200W high power output laser energy can achieve the best hair removal. 2.Low investment and high return. The treatment head is guaranteed for 2 years with No limitation. 3.The constant temperature refrigeration module keeps the water temperature at about 20-25 degrees, which can ensure the system to work continuously for 48hours without stop. 4.Using advanced TEC and sapphire contact cooling technology, the terminal temperature is controlled under 5 ° C, and the skin is properly cooled during the hair removal process, while ensuring the possibility of zero frostbite. 5.The frequency reaches 10hz, the treatment is more fast. Certificate: FDA, Medical CE Machine in treatment:  Before and after treatment photos: Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service. Contact with us: Contact Person: Alex Song, Sunny Zhao E-mail: Alex@sanolasers.com   Sunny@sanhebeauty.com Whatsapp: +86 15321516360    +86 18813196949