Application of SHR-950B Lasting  Hair Removal the unwanted hair under arms, legs, lips, or other body parts. Skin Rejuvenation shrink pores, tighten skin, improve skin elasticity and glossiness. Pigmentation Removal removes various kinds of pigment such as freckles, chloasma, age spots,    sunburn, etc. Acne Clearance   SHR-950B Working Theory SHR-950B is a revolutionary technology for IPL Hair removal treatment. The traditional IPL treat your skin with high amounts of Joules (energy), SHR-690 shots multiple shots but at low amounts of Joules. SHR mode gently heats the hair follicles. Clients feel only warmth and a slight tingling sensation, some even comparing it to a light massage. The system also utilizes In-Motion technology, where the hand piece is always in motion over the skin. System Advantages and Feature The system combines diode laser hair removal working modes  includes SHR working mode to deliver multiple shots but at low amounts of energy,to achieve practically painless results. The system combined with “In Motion”represents a breakthrough in permanent hair removal with light technology.The treatment is more pleasant than with conventional systems and skin is better protected The system is suitable for all skin types, even tanners; Unlike traditional Laser and IPL, SHR can be had all year round without having to hide from the sun. The system utilizes an imported flash lamp with a 300,000 shot life span. Difference Traditional SHR 950BAdvantage Advantage Wavelength 650-1200nm  (HR) 560-1200mm (SR) 650-950nm(HR) 560-950nm(SR) SHR-950B filters both violet light and infrared light which can eradiate and absorb large volumes of water from the skin. Auto identified hand piece Unavailable Available Identified hand piece, HR &SR. The system can enter into correct operation menu directly when you insert the hand piece. Identified function makes the operation simple and treatment safe. Frequency 0.3-1Hz 1-8Hz Which speeds up the operation and reduces treatment time. Work mode Stationary mode Stationary mode & Moving mode Compared with traditional IPL treatment, only 1/8 as much time is needed for treatment of arms, legs, and back. Water circuit monitor Unavailable Available Water temperature, water level, and water flow sensors ensure the hand piece will not burn patients. Stain resistant water circle Unavailable Available Stain resistant water circuit system makes sure no components rust, keeping the crystal and filters clean and ensuring the equipment has a long lifespan. Water lock connector Unavailable Available Treatment head connector with water-lock for safe and easy changing, even with only single treatment head use is allowed.   Laser source: SHR-950B Hair Removal System Wave length:  HR: 650-950nm      SR: 560-950nm Optional:  VR 420-950nPR: 530-950nm   AR:500- 950nm Energy IPL&E-Light:10-50J/cm2SHR:1-10J/cm2 Fluence : IPL&E-light: 10-50J/c㎡  SHR: 1-10J/c㎡ Frequency IPL&E-Light:HR&SR 1-20SHR:HR：1-8    SR：1-3 RF power 1-30W Output power 3000W Voltage AC220V±10%  50HzAC110V±10%  60Hz Xenon UK Imported Xenon Spot size HR：15*50mm   SR：10*40mm Temperature of treatment Lowest-10℃ Cooling system Fan cooling、water cooling、semiconductor cooling system LED screen 10.4  inch color touch screen Machine size 57*47*109CM Packing size 66*58*122CM Net weight 44KG Gross weight 78KG CE Certificate Machine in treatment Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service. Contact  us Alex Song                              Sunny Zhao  Alex@sanolasers.com        Sunny@sanhebeauty.net  +86 15321516360                  +86 18813196949

P-MIX 755 808 1064nm Diode laser hair removal machine is mainly used for professional hair removal. Such as permanently remove lip hair, beard hair, chest hair, armpit hair, limbs hair and unwanted hair on any parts of body. It is suitable for all skin and hair types. Specifications:  Laser type High Intensity 808nm diode laser Laser handle output power 2000W Total power 4000W Laser wavelength 755+808+1064nm Sapphire size (Spot size) 12*23mm Shots Guarantee 2 years no limited Treatment head temperature Max -16 degree Frequency 1-10 Hz Display 10.4 Inch Package size 82*55*120CM Gross weight 82 KG Advantages: 1.USA Imported coherent laser bar is more stable. And 1200W high power output laser energy can achieve the best hair removal. 2.Low investment and high return. The treatment head is guaranteed for 2 years with No limitation. 3.The constant temperature refrigeration module keeps the water temperature at about 20-25 degrees, which can ensure the system to work continuously for 48hours without stop. 4.Using advanced TEC and sapphire contact cooling technology, the terminal temperature is controlled under 5 ° C, and the skin is properly cooled during the hair removal process, while ensuring the possibility of zero frostbite. 5.The frequency reaches 10hz, the treatment is more fast. Certificate: FDA, Medical CE Machine in treatment:  Before and after treatment photos: Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service. Contact with us: Contact Person: Alex Song, Sunny Zhao E-mail: Alex@sanolasers.com   Sunny@sanhebeauty.com Whatsapp: +86 15321516360    +86 18813196949

sano Microneedling RF platform face lifting skin rejuvenation Microneedle RF Pinxel-2 RF Microneedling is the world’s first RF microneedling platform. With the ability to add multiple handpieces*, Pinxel-2 RF offers more versatility than other leading RF Microneedling products. Designed to maximize patient efficacy, experience and your business, Pinxel-2 RF boasts advanced ergonomic, interface, safety and treatment delivery features. Pinxel-2 RF is manufactured by the global leader in RF microneedling technology From the SmartRF handpiece’s , to the exclusive post-treatment protocol, the comfort, results and unique experience your patients can expect from Pinxel-2 RF microneedling are unmatched. The 25 or 49 gold-coated needles of the Smart RF are precisely delivered at a specified depth to provide immediate results with continued improvement over time and a virtually painfree, zero social downtime treatment. Only the Pinxel-2 RF pairs every treatment with the most innovative sheet mask technology available – the Microcurrent Dual Face Mask system. This two mask system soothes skin and eliminates redness. After the pinxel-2 RF treatment, a wet enriching Mask infused with antioxidants, vitamins, moisturizing and anti-inflammatory properties is applied to the skin. Contact with us: Contact Person: Alex Song, Sunny Zhao E-mail: Alex@sanolasers.com   Sunny@sanhebeauty.net Whatsapp: +86 15321516360    +86 18813196949

Microneedle RF non-invasive Fractional rf machiine Application * Remove wrinkle, skin tightening * Pigment and acne treatment * Lighten the scar or acne scar, make pore smaller * Skin rejuvenation, make skin more lighten and smooth * Lighten stretch marks Product Description Specifications Of Fractional RF Micro Needling Machine  Type MRF+SRF Screen 10 ' Color TFT LCD Input Power 50W Output Frequency 2MHz Output Wavelength PDT 650nm Cryo Temperature -5 degree Fractional RF Microneedle Type SRF(Superficial Fractional RF) MRF  (Microneedle Fractional RF) High speed SRF---No pinLow gear SRF---No pin High speed MRF ---81pin,49pin,25pinLow gear MRF---81pin,49pin,25pin Relative humidity range lower 93% Atmostheric pressurer range 50KPa-106KPa Dimension  480mm x 295mm x 1060mm Weight  30kg Technology Advantages 1. Tips species Three kinds of microneedle tips (MRF): 25pin/ 49pin/ 81pin. One kind of superficial RF tip (SRF): 25 dot matrix tip, non-invasive. 2. Needles shooting system Automatic needles,can make the RF energy better distributed in dermis, so patients can get better treatment result. 3. Gold Plating Needle is durable and also has high Biocompatibility by applying Gold Plating. Patient with metal allergy could also use it with not concerning Contact Dermatitis. 4. Needle Depth Control : 0.5~3 mm Operates epidermis layer and dermis layer by controlling the needle depth in unit of 0.1 mm 5. Safety Needle System -Sterilized disposable needle tip -Operator can easily notice the applying RF energy from a red light 6. Needle Thickness Min: 0.01 mm The needle structure is easy to penetrate the skin with minimum resistance. 7. Without Pigment The energy of RF plays a role in dermis directly, therefore, there is no heat summation on the dermis to avoid the possibility of blister and pigment precipitation problems. 8. Without Side Effect The recovery time is short, such as Red face will be decreased in 1~2 days, the Cutin will be dropped within 3~4 days. It won't affect the daily life after treatment. and the patient can clean face and make up directly after operation as usually. 9. Two Treatment Methods There are two treatment ways with Dual Matrix tip and RF Micro needle tip to meet the needs of different clients. Contact with us: Contact Person: Alex Song, Sunny Zhao E-mail: Alex@sanolasers.com   Sunny@sanhebeauty.net Whatsapp: +86 15321516360    +86 18813196949

sano Microneedling RF platform face lifting skin rejuvenation Microneedle RF Pinxel-2 RF Microneedling is the world’s first RF microneedling platform. With the ability to add multiple handpieces*, Pinxel-2 RF offers more versatility than other leading RF Microneedling products. Designed to maximize patient efficacy, experience and your business, Pinxel-2 RF boasts advanced ergonomic, interface, safety and treatment delivery features. Pinxel-2 RF is manufactured by the global leader in RF microneedling technology From the SmartRF handpiece’s , to the exclusive post-treatment protocol, the comfort, results and unique experience your patients can expect from Pinxel-2 RF microneedling are unmatched. The 25 or 49 gold-coated needles of the Smart RF are precisely delivered at a specified depth to provide immediate results with continued improvement over time and a virtually painfree, zero social downtime treatment. Only the Pinxel-2 RF pairs every treatment with the most innovative sheet mask technology available – the Microcurrent Dual Face Mask system. This two mask system soothes skin and eliminates redness. After the pinxel-2 RF treatment, a wet enriching Mask infused with antioxidants, vitamins, moisturizing and anti-inflammatory properties is applied to the skin. Contact with us: Contact Person: Alex Song, Sunny Zhao E-mail: Alex@sanolasers.com   Sunny@sanhebeauty.net Whatsapp: +86 15321516360    +86 18813196949

What is Pico second laser? Pico second laser is the latest new generation technology for aesthetic use. Through trillions of a second and powerful laser energy to grind the pigment in the skin tissue to reach the result of completely tattoo removal and pigment in all type of skin color. Through specialized fractional lens, Pico second laser can convert laser energy into gentle pressure to create new collagen by squeezing cells and activating the natural cell without burning or damaging the skin. Picosecond nd yag laser system principle: The energy of  Picosecond laser can be absorbed by the blue and black melanin. The melanin will be fragmented so small that they can be metabolized by the lymphatic system or digested out of body. Thus the tattoo or other pigmentation will be removed without damage to the normal tissue. The treatment is safe and convenient without downtime and side effects. Indications 1. Freckles, sunburn, age spots, chloasma, liver spots, dermal spots, etc. 2. Skin rejuvenation and whitening, narrow pores 3. Uneven skin tone 4. Acne marks 5. Red and black moles 6. Tattoos, red and blue eyebrows tattoo Advantages: Operation Steps 1、Clean the treatment area, if you have hair, you need to remove it 2、Apply anesthetic cream as needed 3、Disinfect the treatment area 4、Adjust the treatment parameters according to the parameter table 5、All treatments are recommended not to break the skin or ooze blood, which can greatly reduce the risk of melanin deposition, and the number of treatments will increase accordingly. When starting treatment, use low frequency first (let the machine warm up first to reduce the damage to the machine), and slowly close to the skin to continuously emit light. Then slowly raise up to find a suitable distance to start treatment. After a few minutes, you can increase the frequency. When you start treatment, you must first get close to the skin to continuously emit light, and then slowly raise the treatment head, so as to avoid the sound from scaring the patient It can also find the best treatment distance. When the blasting sound is the loudest, it is when the energy is focused. In many cases, the focused energy is not used, because the focused energy will bleed, and the probability of coloration is very large. Generally 2 minutes after treatment The skin will flush and the effect is best. Focusing on energy: The point with the greatest energy can be judged by listening to the sound, and the point where the sound is the loudest and the most brittle can be understood by beginners. 6.It is recommended to use repair products and products that inhibit pigmentation after treatment 7.After treatment, you must enter physical sunscreen, masks, umbrellas, etc. 8.The general treatment interval is about one month, the parameter table has the recommended number of treatments, and the doctor determines whether to add treatment according to the patient's recovery. Laser type Pico second ND: YAG Laser Energy Level Single Mode: Max 400mj (532nm), Max 800mj (1064nm) Double Mode:Max 800mj(532nm), Max 1600mj (1064nm) Pulse width 750ps wavelength 1064nm,532nm,585nm(option),650nm(option) Frequency 1-10hz Spot size 2-10mm Dimension 107*50*118CM weight 115KG   Postoperative care 1.After treatment, there may be slight pain, white skin surface, epidermal bleeding, transient redness, swelling, blackening or even purpura. They can be absorbed by themselves without being too nervous.If there is a scab that will fall off on its own within 7--14 days, it should not be removed artificially, so as to avoid delaying skin healing and forming pigmentation. 2.Due to individual differences or climate changes, within a few days after treatment, the treatment area must not be in direct contact with water or other solutions to prevent infection. Try to eat less spicy food, excessive drinking, and smoking. 3.Very few individuals may have pigmentation on their skin after treatment, which usually subsides after 1-3 months. 4.After the operation, try to avoid activities in the sun and exposure, in order to avoid the production and increase pigmentation. Physical sunscreen works best 5.If any abnormal phenomenon is found after the operation, please go to the outpatient consultation and treatment in time. Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service. Alex Song                        Sunny Zhao                          Daria Jia Alex@sanolasers.com     Sunny@sanhebeauty.com    Daria@sanhebeauty.net   +86 15321516360            +86 18813196949                    +86-18831450595

Applications: Tattoo removal: Blue, black, red, yellow, green or brown tattoos; lip line or eyebrow line pigmentation Dermal pigmentation: Birth marks: Ota nevus, Ito nevus, black nevus, etc. Pigmentation: sun-burn spots, age spots, speckles,  freckles, senior flecks, etc. Epidermal pigmentation: such as  freckle, senior flecks, coffee spot .... Vascular  lentigines: vascular lesions, spider vessels, spider veins Skin rejuvenation, carbon peeling Principle: According to the principle of selective photopyrolysis, when shorted the action time of the laser, the laser energy diffuses less to the surrounding tissue. If the energy is limited to the target that needs treatment, the surrounding normal tissue can be protected, so the selectivity of treatment become stronger. The picosecond laser pulse width is only 1% of the traditional Q-switched laser. Under this ultra-short pulse width, the light energy is too late to be converted into heat energy, and there is almost no photothermal effect.When the laser energy is absorbed by the target, its volume will expand rapidly, and then be blasted and torn into pieces. "The picosecond laser is more powerful and complete in crushing pigment particles and less damaging the surrounding tissue." From the perspective of treatment, the effective rate can reach more than 94% (Ota nevus almost 100%). Machine advantages: ♦ 7 jointed arm delivery system, make it easy for longtime treatment. ♦ Spot size(2-10nm) can be adjusted through forcus ajdustment lens. ♦ Single and double pulses can be adjusted by the screen, the wavelength change is 1064 / 532nm. ♦ Red diode laser beam point, find the right treatment area exactly. ♦ High power built in water cooling system make the machine can be continuely use. Treatment Effect: Technical Specification:   Wave length: 1064nm, 532nm Output Energy: Single pulse: 1064nm: 100-800mj; 532nm:100-400mj Energy density (max.): Double pulse: 1064nm: 100-1600mj; 532nm:100-800mj 1064nm: 15.0J/cm2; 532nm:8j/cm2 Pulse duration: 750ps Repetition Rate: 1-10hz adjustable Spot Size: φ2-10mm adjustable Light guide beam: 650nm red laser Cooling System: Closed Cycle Water to Air Heat Exchanger Laser delivery: Korea 7 jointed articulated arm Controlling system: 10.4inch TFT color touch screen Power requirement: 220V,10A,50/60Hz; 110v,10A, 50/60Hz Machine dimensions: 680mm×400mm×820mm Net weight: 75kg Note: Technical data changed will not inform specially Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service. Contact:  Ruby Mu Email:   ruby@sanhebeauty.net Mobile:   +8617633631496 (Whatsapp/wechat)

Application: Body slimming Body shaping. Fat buring machine Fat loss machine Slimming beauty machine Ultrasound cavitation slimming machine RF face lifting What isSaluShape Body Slimming And Face Lifting Machine TREATMENT? For a long time people have been trying desperately to lose fat from selected areas of the body, the only viable remedy for that has been Liposuction. Now HIFU Body Slimming and Tightening is the painless alternative to that. HIFU Body Slimming and Tightening uses Ultrasound waves to permanently get rid of the fat cells in the selected problem area of the body. HIFU body slimming and tightening uses high intensity focussed Ultra Sound to disrupt fat cells in a effective and safe manner. The energy is focussed 1-2 cm beneath the surface of the skin which ensures the treatment is comfortable. The fat cells are disrupted by HIFU resulting in 3-8cm reduction in 1-3 treatments roughly 45 days apart. HIFU Slimming and Tightening procedure is basically an inch loss procedure SaluShape body slimming and face lifting machine advantage Average abdominal reduction after 3 treatments: between 33 and 63mm Visible results within 2 weeks after treatment Comfortable: no swelling or bumps post-treatment Pulse quantity is calculated automatically by measuring target area size;only 45 -60 mins for each treatment. SaluShape body slimming and face lifting machine Specification andle type Frequency Energy level Treatment mode Tip size Focused ultrasound 230khz 1-30 degree pulse mode D42mm Ultrasound cavitation 40khz 1-10 degree Continuous mode D50mm Bipolar RF 2Mhz 1-30 degree Continuous mode D8mm, Distance:15mm Input Power 400W Focus Depth 12mm Cooling head temperature -5°C-5°C Treatment life span of handpiece 500,000 shots Machine size 550X360X1175mm Package dimension 705*515*1130mm Machine weight 38kg Package weight 63kg Power requirements 110V-240V,10A single phase Environmental requirements +15C-30C, 80% humidity   SaluShape Body Slimming And Face Lifting Machine effect Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service. Contact with us:  Contact Person: Sunny Zhao, Alex Song E-mail: Sunny@sanhebeauty.com,   Alex@sanolasers.com Whatsapp: +86 18813196949  +86 15321516360

Functions SHR-950B machine is a revolutionary technology for IPL Hair removal treatment. SHR machine combines IPL, E-light and SHR models of operation. Usually used for hair removal, permanent Hair removal, skin rejuvenation, skin whitening, skin tightening, improve skin elasticity and glossiness, pigmentation removal, ect. The system also utilizes In-Motion technology, where the hand piece is always in motion over the skin. Therefore, this machine is widely used in beauty clinic, beauty salon, ect. Laser source: SHR-950B Hair Removal System Wave length:  HR: 650-950nm      SR: 560-950nm Optional:  VR 420-950nPR: 530-950nm   AR:500- 950nm Energy IPL&E-Light:10-50J/cm2SHR:1-10J/cm2 Fluence : IPL&E-light: 10-50J/c㎡  SHR: 1-10J/c㎡ Frequency IPL&E-Light:HR&SR 1-20SHR:HR：1-8    SR：1-3 RF power 1-30W Output power 3000W Voltage AC220V±10%  50HzAC110V±10%  60Hz Xenon UK Imported Xenon Spot size HR：15*50mm   SR：10*40mm Temperature of treatment Lowest-10℃ Cooling system Fan cooling、water cooling、semiconductor cooling system LED screen 10.4  inch color touch screen Machine size 57*47*109CM Packing size 66*58*122CM Net weight 44KG Gross weight 78KG Treatment Theory This machine base on that the Intense pulse light can penetrate into deep skin, and destroy the hair follicle. So it will do a good job for the hair removal. And use the different wavelength. Which can achieve the purpose for skin rejuvenation, such as the Acne removal, Vascular removal. The advantages of hair removal (1)（The pain of laser hair removal is relatively small (2)The best hair removal effect, hair removal is very complete, Laser effect on the hair follicles in different depth to remove the hair effectively forever (3)Laser hair removal treatment can not be the same as the traditional hair removal method, after treatment, there will be the pigmentation in the skin surface, because the skin absorb less laser (4)The cooling systems can reduce the heat produced in the treatment to protect the skin Rejuvenation advantage （1）Laser skin rejuvenation is highly safe （2）Remarkable effect, after 7 days of skin rejuvenation, there will be obvious changes in the skin （3）Solve many aspects of skin problems, coarse pores, fine lines, scars, stains, acne, freckles and so on （4）Laser rejuvenation does not hurt the face of the skin on the basis of the no pain, not swollen treatment effect CE Certificate Machine in treatment Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service. Contact with us:  Contact Person: Sunny Zhao, Alex Song E-mail: Sunny@sanhebeauty.com,   Alex@sanolasers.com Whatsapp: +86 18813196949  +86 15321516360