Newest Microneedle RF Fractional Equipment sano pinxel-2 RF machine face lifting Application * face lift, wrinkle removal * acne and scar removal * skin tigthening, skin whiting * Skin rejuvenation, make skin more lighten and smooth * stretch marks removal Product Description Specifications Of Fractional RF Micro Needling Machine  Type MRF+SRF Screen 10 ' Color TFT LCD Input Power 50W Output Frequency 2MHz Output Wavelength PDT 650nm Cryo Temperature -5 degree Fractional RF   Microneedle Type SRF (Superficial Fractional RF) MRF (Microneedle Fractional RF)    High speed SRF---No pin Low gear SRF---No pin High speed MRF ---81pin,49pin,25pin Low gear MRF---81pin,49pin,25pin Relative humidity range lower 93% Atmostheric pressurer range 50KPa-106KPa Dimension  480mm x 295mm x 1060mm Weight  30kg Technology Advantages 1. Tips species Three kinds of microneedle tips (MRF): 25pin/ 49pin/ 81pin. One kind of superficial RF tip (SRF): 25 dot matrix tip, non-invasive. 2. Needles shooting system Automatic needles,can make the RF energy better distributed in dermis, so patients can get better treatment result. 3. Gold Plating Needle is durable and also has high Biocompatibility by applying Gold Plating. Patient with metal allergy could also use it with not concerning Contact Dermatitis. 4. Needle Depth Control : 0.5~3 mm Operates epidermis layer and dermis layer by controlling the needle depth in unit of 0.1 mm 5. Safety Needle System -Sterilized disposable needle tip -Operator can easily notice the applying RF energy from a red light 6. Needle Thickness Min: 0.01 mm The needle structure is easy to penetrate the skin with minimum resistance. 7. Without Pigment The energy of RF plays a role in dermis directly, therefore, there is no heat summation on the dermis to avoid the possibility of blister and pigment precipitation problems. 8. Without Side Effect The recovery time is short, such as Red face will be decreased in 1~2 days, the Cutin will be dropped within 3~4 days. It won't affect the daily life after treatment. and the patient can clean face and make up directly after operation as usually. 9. Two Treatment Methods There are two treatment ways with Dual Matrix tip and RF Micro needle tip to meet the needs of different clients. Contact with us: Contact Person: Alex Song, Sunny Zhao E-mail: Alex@sanolasers.com   Sunny@sanhebeauty.net Whatsapp: +86 15321516360    +86 18813196949

laser and led hair loss treatment machine Technologies for HR-II: 1.650nm diode laser 2.808nm infrared laser 3.630nm red PDT 4.460nm blue PDT 5. 580nm yellow PDT 6. PDT&EMS comb 7. Single head Oxygen Jet—for epidermis 8. Oxygen gun—Oxygen spray Characteristics: 1. Stimulate the scalp, anti-hair loss, no harm, no consumables, no drug side effects 2. Six in one hair mask 3. Accurate light dose, output stability, long life 4. For male and female hair loss, six kinds of automatic programming, used in Different stages of hair loss 5. Multi-hand designed 6. Dual-color interactive touch Applications: 1. Seborrheic, pathological, physical, chemical and obesity hair loss 2. Catagen and telogen hair loss 3. Follow-up care after hair transplant 4. Improving the hair quality The feature of this machine: 1.Five kinds of wavelength (808nm，650nm，630nm，580nm, 460nm ). 2.Lasers and LED cold laser mixed in one helmet. Most of the laser hair regrowth machine in the market only has the 650nm laser. Or only LED. But our SH650-1 hair regrowth system combines two kinds of lasers and 3 kinds of LED. 3. Laser and LED lights are imported from Japan. We use higher quality Japanese laser and LED light. Energy is stable, lifetime is longer. 4.Oxygen spray pen. Used for clean and sterilize scalp. 5.Medicine spray pen. It can help the hair regrowth medicine like Minoxidil average on the scalp. 6.Micro-current massage comb. To help medicine absorbed faster, and do massage to the scalp. 7.Professional hair & Scalp analyzer. It can do the analysis for hair and scalp, save 2000 patients’ information, before and after photos (It has a camera to take photos), and print analysis report. 8. The system is very easy to operate. The work time for the 5 wavelengths is adjusted separated. Most the machine in the market has no Medicine spray pen, Micro-current comb, Oxygen sprayer, also no Hair& Scalp analyzer. Functions: 1. Accelerate blood circulation to improve regeneration ability collagen fibers and promote metabolism 2. Modulate the hair follicles 3. Regulate oil secretions 4. Promote scalp health, improve hair quality 5. Promote nutrient absorption Technologies for hair mask: 1. 630nm red PDT 2. 580nm yellow PDT 3. 470nm blue PDT 4. 650nm red laser 5. 808nm infrared laser 6. Oxygen therapy Treatment results Contact with us: Contact Person: Alex Song, Sunny Zhao E-mail: Alex@sanolasers.com   Sunny@sanhebeauty.net Whatsapp: +86 15321516360    +86 18813196949

Functions Magshape is a newest body sculpting device which user HI-FEM technology to stimulate the muscle, the muscle negative contraction, in 30 minutes, the conreaction can reach 49,5000 times, so that get effect of muscle building , body shaping , weigt loss ,creat fishing line and vest line.   Working principle  It uses non-invasive high-energy focused electromagnetic technology to stimulate the motor neurons of the body muscles through the energy output from the electromagnetic field, and trigger the muscles to undergo high-frequency super-contraction. During the process of extreme super-contraction, some muscle fibers occur broken and make deep remodeling of muscles,that is the growth of myofibrils (muscle enlargement) and the production of new collagen chains and muscle fibers (muscle hyperplasia), which strengthens the muscles and improves the lines.While super muscle contraction consumes a lot of energy, triggers a large amount of fat breakdown, in order to burn and reduce fat.So as to easily achieve the purpose of building muscle and burn fat. At the same time, the muscles are super contracted, it drive the high-speed circulation of lymphatic blood, promotes metabolism, and improves immunity. Core principles Advantage *Building muscles and burn fat together *Non-invasive hip lifting * Suitable for everyone-no anesthesia-no surgery *Short-term treatment, one time 30 minutes *Only 4 sessions are required between 2-3 days *Feels like an intensive exercise *Safe without downtime *The result is immediate, but it will be noticeable after two to four weeks. *Muscle mass increased by an average of 16% *Average fat loss 19% Machine in treatment Effect description Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service. Contact with us:  Contact Person: Sunny Zhao, Alex Song E-mail: Sunny@sanhebeauty.com,   Alex@sanolasers.com Whatsapp: +86 18813196949  +86 15321516360

laser hair regrowth hair laser machine women / men hair regrowth equipment from Sano laser European studies have shown that LLLT stops hair loss in 85% of cases and stimulates new hair growth in 55% of cases. The therapeutic light-energy is absorbed by the cells and the process of cell repair begins, it stimulates the production of energy at the cellular level, therefore, improving cell function. SH650-1 Low Level Lasers are referred to as "cold" lasers because they do not release energy in the form of heat. The light wavelength emitted from a low level laser actually will repair tissues that have impaired cellular metabolism by stimulating blood circulation, encouraging regeneration of normal healthy tissues. Application: factory direct! low level laser therapy hair regrowth machine  - Male pattern baldness (Androgenic Alopecia) - Femail pattern baldness (female-pattern alopecia) - Thinning hair - Damaged or broken hair - Alopecia areata - Traction Alopecia 3 kinds of LED light 2 kinds of Laser + 3 kinds of LED Features of low level laser therapy hair regrowth machine  - High density non-ablative diode laser - Large treatment size with big helmet - Deep penetration by the LLL (low level laser) for hair restoration treatment - Microcurrent probe (handheld) and comb for hair regrowth therapy - Applicable for all skin type and hair type, comfortable and painless for clients - No downtime Laser Source Diode Laser + LED Wavelength 650nm+ 8080nm + Red, Yellow, Blue LED Laser Energy Max. 20 mw per diode Total Laser Amount 484 Laser Feature Energy adjustable, Panel can be controlled separately Timer Support (1 – 60 min) Microcurrent Therapy Handheld probe + Comb Radiation Dimension 550 x 350 mm Power < 300 Watts Weight 39Kg Working Environment 10 – 28℃ 30~80%RH,500~1060hPa Power Specification AC220V/50Hz, 16A Dimension 1150 x 440 x 550mm   Contact with us: Contact Person: Alex Song, Sunny Zhao E-mail: Alex@sanolasers.com   Sunny@sanhebeauty.net Whatsapp: +86 15321516360    +86 18813196949   Effective treatment results

Newest Microneedle RF Fractional Equipment sano pinxel-2 RF machine face lifting Application * Remove wrinkle, skin tightening * Pigment and acne treatment * Lighten the scar or acne scar, make pore smaller * Skin rejuvenation, make skin more lighten and smooth * Lighten stretch marks Product Description Specifications Of Fractional RF Micro Needling Machine  Type MRF+SRF Screen 10 ' Color TFT LCD Input Power 50W Output Frequency 2MHz Output Wavelength PDT 650nm Cryo Temperature -5 degree Fractional RFMicroneedle Type SRF(Superficial Fractional RF) MRF(Microneedle Fractional RF) High speed SRF---No pinLow gear SRF---No pin High speed MRF ---81pin,49pin,25pinLow gear MRF---81pin,49pin,25pin Relative humidity range lower 93% Atmostheric pressurer range 50KPa-106KPa Dimension  480mm x 295mm x 1060mm Weight  30kg Technology Advantages 1. Tips species Three kinds of microneedle tips (MRF): 25pin/ 49pin/ 81pin. One kind of superficial RF tip (SRF): 25 dot matrix tip, non-invasive. 2. Needles shooting system Automatic needles,can make the RF energy better distributed in dermis, so patients can get better treatment result. 3. Gold Plating Needle is durable and also has high Biocompatibility by applying Gold Plating. Patient with metal allergy could also use it with not concerning Contact Dermatitis. 4. Needle Depth Control : 0.5~3 mm Operates epidermis layer and dermis layer by controlling the needle depth in unit of 0.1 mm 5. Safety Needle System -Sterilized disposable needle tip -Operator can easily notice the applying RF energy from a red light 6. Needle Thickness Min: 0.01 mm The needle structure is easy to penetrate the skin with minimum resistance. 7. Without Pigment The energy of RF plays a role in dermis directly, therefore, there is no heat summation on the dermis to avoid the possibility of blister and pigment precipitation problems. 8. Without Side Effect The recovery time is short, such as Red face will be decreased in 1~2 days, the Cutin will be dropped within 3~4 days. It won't affect the daily life after treatment. and the patient can clean face and make up directly after operation as usually. 9. Two Treatment Methods There are two treatment ways with Dual Matrix tip and RF Micro needle tip to meet the needs of different clients. Contact with us: Contact Person: Alex Song, Sunny Zhao E-mail: Alex@sanolasers.com   Sunny@sanhebeauty.net Whatsapp: +86 15321516360    +86 18813196949

Working Therapy & Functions I-Cool Skin air cooler is intended to minimize pain and thermal injury during laser and dermatological treatments. It also provides temporary topical anesthetic relief during injections, tattoo application, tattoo removal, RF, laser hair removal and much more.  Machine Description Icool cooling machine is a incredible cooling system, which will never disturb the laser output and working. Combine with the laser equipment, such as 808 diode laser, IPL, RF，To relieve patient’s pain, redness, swelling and hear damage. Working Theory Before operation using，have a temporary anesthesia。 Powerful cooling to -30℃。 The 1500W high-power compressor provided by Danfoss ensures the system can work continuously for long periods of time.（When the wind speed level is 4, The machine can work for 2 hours the minimum temperature） High-speed fans have a strong cooling effect, also 6 levels  wind speed can meet the needs of different treatments。 Automatic defrost is the best performance for cooling。 The self-draining system ensures the safe and cleaning of machine。 The supporter for cooling make the operation more comfortable。  Type ICOOL air cooling system Control System 5 Inch True Color Touch Screen Power 1500W Temperature -30℃ to -4℃ Wind Lever 1-6 Adjustable Defrost Time 45S Working Voltage 110V，60hz,3A, 220V,50hz, 3A Net Weight 62kg Cooling Tube Lengthe 2m Supporter 3 part Machine size 75*40*86CM Package size 91*53*108CM Net Weight 65kg GrossWeight 100KG   Real picture Machine in treatment Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service. Contact with us:  Contact Person: Sunny Zhao, Alex Song E-mail: Sunny@sanhebeauty.com,   Alex@sanolasers.com Whatsapp: +86 18813196949  +86 15321516360

Functions SHR-950B machine is a revolutionary technology for IPL Hair removal treatment. SHR machine combines IPL, E-light and SHR models of operation. Usually used for hair removal, permanent Hair removal, skin rejuvenation, skin whitening, skin tightening, improve skin elasticity and glossiness, pigmentation removal, ect. The system also utilizes In-Motion technology, where the hand piece is always in motion over the skin. Therefore, this machine is widely used in beauty clinic, beauty salon, ect. Laser source: SHR-950B Hair Removal System Wave length:  HR: 650-950nm      SR: 560-950nm Optional:  VR 420-950nPR: 530-950nm   AR:500- 950nm Energy IPL&E-Light:10-50J/cm2SHR:1-10J/cm2 Fluence : IPL&E-light: 10-50J/c㎡  SHR: 1-10J/c㎡ Frequency IPL&E-Light:HR&SR 1-20SHR:HR：1-8    SR：1-3 RF power 1-30W Output power 3000W Voltage AC220V±10%  50HzAC110V±10%  60Hz Xenon UK Imported Xenon Spot size HR：15*50mm   SR：10*40mm Temperature of treatment Lowest-10℃ Cooling system Fan cooling、water cooling、semiconductor cooling system LED screen 10.4  inch color touch screen Machine size 57*47*109CM Packing size 66*58*122CM Net weight 44KG Gross weight 78KG Treatment Theory This machine base on that the Intense pulse light can penetrate into deep skin, and destroy the hair follicle. So it will do a good job for the hair removal. And use the different wavelength. Which can achieve the purpose for skin rejuvenation, such as the Acne removal, Vascular removal. The advantages of hair removal (1)（The pain of laser hair removal is relatively small (2)The best hair removal effect, hair removal is very complete, Laser effect on the hair follicles in different depth to remove the hair effectively forever (3)Laser hair removal treatment can not be the same as the traditional hair removal method, after treatment, there will be the pigmentation in the skin surface, because the skin absorb less laser (4)The cooling systems can reduce the heat produced in the treatment to protect the skin Rejuvenation advantage （1）Laser skin rejuvenation is highly safe （2）Remarkable effect, after 7 days of skin rejuvenation, there will be obvious changes in the skin （3）Solve many aspects of skin problems, coarse pores, fine lines, scars, stains, acne, freckles and so on （4）Laser rejuvenation does not hurt the face of the skin on the basis of the no pain, not swollen treatment effect CE Certificate Machine in treatment Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service. Contact with us:  Contact Person: Sunny Zhao, Alex Song E-mail: Sunny@sanhebeauty.com,   Alex@sanolasers.com Whatsapp: +86 18813196949  +86 15321516360

Working Theory The working principles of intense pulsed skin rejuvenation and hair removal are same. They can selectively effect on hair follicles full of  melanin according to the photothermal principle to destroy the follicles to achieve the permanent hair removal.     This machine has multi-functions. It combines IPL, Elight and SHR models of operation. You can choose IPL, E light and SHR different working modes. Traditional photorejuvenation can output a lot of energy to the skin, SHR system reduce small pain, high frequency can be used with sliding treatment, it is easy to operate fast. Functions ◆Permanent hair removal: Armpit extra hair, legs, lips, or other parts of the body. ◆Skin rejuvenation: Shrink pores, tighten the skin, improve skin elasticity and gloss. ◆Pigment removal: remove a variety of pigments such as freckles, chloasma, senile plaques, sunburn, and so on. ◆Acne System Advantages and Feature Rejuvenation advantage ◆Laser skin rejuvenation is highly safe ◆Remarkable effect, after 7 days of skin rejuvenation, there will be obvious changes in the skin ◆Solve many aspects of skin problems, coarse pores, fine lines, scars, stains, acne, freckles and so on ◆Laser rejuvenation does not hurt the face of the skin on the basis of the no pain, not swollen treatment effect Laser source: SHR-950B Hair Removal System Wave length:  HR: 650-950nm      SR: 560-950nm Optional:  VR 420-950nPR: 530-950nm   AR:500- 950nm Energy IPL&E-Light:10-50J/cm2SHR:1-10J/cm2 Fluence : IPL&E-light: 10-50J/c㎡  SHR: 1-10J/c㎡ Frequency IPL&E-Light:HR&SR 1-20SHR:HR：1-8    SR：1-3 RF power 1-30W Output power 3000W Voltage AC220V±10%  50HzAC110V±10%  60Hz Xenon UK Imported Xenon Spot size HR：15*50mm   SR：10*40mm Temperature of treatment Lowest-10℃ Cooling system Fan cooling、water cooling、semiconductor cooling system LED screen 10.4  inch color touch screen Machine size 57*47*109CM Packing size 66*58*122CM Net weight 44KG Gross weight 78KG CE Certificate Machine in treatment Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service. Contact  us Alex Song                         Sunny Zhao                       Ruby Mu  Alex@sanolasers.com   Sunny@sanhebeauty.com    ruby@sanhebeauty.net  +86 15321516360                +86 18813196949          +86 17633631496

Tighten and firm your skin - Microneedle RF face lifting machine Application * Remove wrinkle, skin tightening * Pigment and acne treatment * Lighten the scar or acne scar, make pore smaller * Skin rejuvenation, make skin more lighten and smooth * Lighten stretch marks       Stimulates new collagen production to not only give you tighter, firmer-looking skin,* but younger-acting skin     Targets blemishes for a smoother, more radiant complexion     Provides faster healing time than traditional microneedling Features:   1. Pinxel-2 has four handles, Fractional RF handle (Non-invasive), Micro-needle RF handle (invasive), a cooling head, and a negative polar. 2. This machine is used for acne, scar, wrinkle, pigmentation removal, Skin Resurfacing, Large Pore Reduction and skin rejuvenation, face lifting, skin tightening. 3: This machine has Bipolar mode and Mono-polar mode two treatment mode, Most of China RF machine only has bi-polar mode. In Mono-polar mode, the RF energy is stronger. If using Mono-polar mode, the patient need to hold the negative polar handpiece Advantages: 1: It has insulated and non-insulated needle tips, two needle types for the doctor to choose. (25 pins insulated, 25 pins non-insulated, 49 insulated and 49 pins non-insulated needle tip) 2: The depth of the needle are adjustable on screen, 0.5mm-3mm. 0.5-1.0mm used for eye around, 1.0-2.0mm used for face treatment. 2.0-3.0mm used for body treatment. 3: There are 25 pins, 49 pins needle tips, insulated tips and non-insulated tips. 4: It uses Korea imported step motor. The needles are stronger, can come into skin more easily. In China, only Sanhe use this kind of motor. 5: It has a cooling head. Used for after-treatment care. Most other similar machines have no cooling head Contact with us: Contact Person: Alex Song, Sunny Zhao E-mail: Alex@sanolasers.com   Sunny@sanhebeauty.net Whatsapp: +86 15321516360    +86 18813196949

Core principles: Through HI-EMT (high energy focused electromagnetic wave) technology, autologous muscles can realize the ultimate training of continuous expansion and contraction, so as to deeply reshape the internal structure of muscles. It promotes the growth of myofibrils (muscle enlargement) to produce new protein chains and muscle fibers (muscle hyperplasia) and increases muscle density and volume through training.The core principle of Magshape: High energy focused electromagnetic wave Free of ionization .The nonthermal No radiation Under Hi-EMT technology, the 100% limit muscle contraction movement can cause a large amount of fatty acid decomposition, fatty acid from the triglyceride decomposition outflow, in the fat cell a large amount of accumulation.Fatty acid concentration is too high, allowing adipocyte apoptosis, in a few weeks by the body normal metabolism out of the body. So Magshape can strengthen and increase muscle, at the same time accomplish reducing fat effectively Advantage Magshape is a multifunctional body shaping and musule building instrument. It is suitable for slimming, shaping, gaining muscle, dissolving fat, exercising vest lines and raising hips，good for health. It is particularly effective for the buttocks and abdomen. It uses high-intensity focused electromagnetic (HIFEM) field technology to induce short-term bursts of strong muscle contraction, resulting in increased muscle density, reduced volume, improved clarity and improved tone. It is the only way to help women and men build muscle and burn fat, and is the world's first non- invasive method of lifting hips. It works by super-maximal contraction; muscle tissue is forced to adapt to this extreme condition. It responds by a profound transformation of the internal structure, which leads to muscle accumulation, tension, conditioning and burning fat. By reducing abdominal fat and at the same time building a muscle foundation under the fat, it helps patients achieve a slimmer and more athletic body contour. When applied to the buttocks, it can give the patient a more weight-lifting, sporty body shape. The heating/cooling principle is not used, so there is no risk of burns, scars or swelling. The recommended treatment plan is to perform four times,every time 30 minutes within two weeks. The best results will be seen after three months, and will continue to improve after six months. Can strengthen gluteal or abdominal muscles and burn fat while maintaining Treatment course 1. 2-3 times a week, 4-6 times as a treatment course. 2. 4-6 treatment courses are best. Depending on the customer's physical condition, obese or long-term non-exercise customers can increase the treatment course. 3. The best effect is 2-4 weeks after treatment. Some people will feel tight muscles just after finishing 4. Additional treatments at intervals of 2-3 months can maintain the most maintained effect Machine in treatment Before and after picture Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service. Contact with us:  Contact Person: Sunny Zhao, Daria Jia E-mail: Sunny@sanhebeauty.com,   Daria@sanhebeauty.net Whatsapp: +86 18813196949  +86 18831450595

Introduction It is a first rate air cooling system developed for Pre, post and During the laser treatment without interfering the laser beam emission. It is designed for reducing pains, redness,swelling and thermal damages caused by lasertreatment, Intense Light (IPL) treatment and Radio frequency (RF) treatment Unlike other cooling methods, such as contact cooling, cryogen spray or ice packs, the ICOOL-3 can cool the epidermis before, during and after the laser energy has been applied, without interfering with the laser beam. Laser source: Stormfiber-II air cooling system Controlling screen: 2.4 inch multi color screen Cooling power: 1500W Temperature range: -4℃~-30℃(adjustable) Refrigerants: R404A Fan speed: 1~8 level (adjustable) Treatment Pipe: 2.5m Pipe weight: 200g Outlet adaptor size: Φ6mm  Φ10mm  10mm*1.5mm LCD Screen: 2.4 Inch Storage platform size: 450*280*20mm Machine size: 610*380*750mm    50KG Package size: 820-500-930mm    74KG Power source: AC/100-240 V, 50-60 Hz，10A Safety Class: EN60601-1,TypeB MDD/MPG,Class I Working Theory The 1500W high-power compressor provided by Danfoss ensures that the system can work continuously for a long time.The high-speed fan makes the air emit a strong cooling effect,and the fan automatically adjusts with the temperature setting.Self-defrosting is the best performance ofrefrigeration performance. The self-draining system ensures safe and clean use. The support rod device of the blowing pipe makes the operation more comfortable. Advantages: (1) HIGHLY Compressor Imported from Japan and DUPONT environmentally friendly refrigerant R134a; (2) Ultra-low temperature refrigeration -30 degrees (3) Applicable to foreign machines (same size as ZIMMER and foton) (4) 2.5mm length and 200g weight of the air pipe are more flexible; (5) 5.1L large capacity bellows, sustainable ultra-low temperature treatment (6) Dedicated bracket for easy operation with orientation (7) 2.4-inch true color touch screen, visual human-machine interface Adapters for Diode laser and IPL After inserted the connector assembly,The I-Cool could works with 808nm diode laser hair removal machine, co2 fractional laser machine, SHR machine, IPL machine and Nd yag laser machine...Suitable for all machines if patients feel pain and needs cooling procedure. Best  partner: After inserted the connector assembly,The I-Cool could works with 808nm diode laser hair removal machine, co2 fractional laser machine, SHR machine, IPL machine and Nd yag laser machine...Suitable for all machines if patients feel pain and needs cooling procedure Precautions of using (1) The temperature setting can be adjusted 8 minutes after starting; (2) The interface only displays the set temperature, not the actual temperature; (3) The wind speed can be adjusted automatically according to the temperature setting, the lower the temperature, the higher the wind speed; (4) Observe the water level before using the machine. If the water tank is full, drain it in time; (5) The instrument cannot be transported upside down, and it must be left for two hours before it can be used Details CE Certificate Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service. Contact with us:  Contact Person: Sunny Zhao, Daria Jia E-mail: Sunny@sanhebeauty.com,  Daria@sanhebeauty.net Whatsapp: +86 18813196949  +86 18831450595