LLLT Low Level Laser + LED Hair Regrowth Machine for hair loss treatment How SH650 laser hair therapy treatment works: SH650 is the use of low level laser that induce blood flow to the top of the scalp which in turn creates positive and healthy hair growth. This program focuses and defends against the main known causes of hair loss which include insufficient blood supply at the scalp level, improper nutritional intake, controls excessive levels of DHT, and breaks down oil deposits on the scalp that will eventually lead to hair loss. SH650 treatment provides the following advantages: a)       Enhances your image and boosts your confidence. b)       Increases blood flow to the top of the scalp by up to 55% which in turn increases hair growth in follicle still capable of producing hair. c)       Stop hair loss in 85% of patients regulates sebaceous gland activity, for people with overly dry or oily scalp. d)       Repair damaged hair shafts, increase the thickness of individual hairs by up to 25% per hair providing much thicker and fuller appearance. e)       Relieves itchy scalp conditions. f)         Decreases recovery time when used in conjunction with hair transplants. g)       Safe, effective and painless procedure. h)       Affordable SH-650 treatment is safety and painless: SH-650 uses low level laser module as a light source that does not have a thermal component so they will NOT vaporize or burn tissue. Our lasers are considered a Class 1M cosmetic device and are rendered safe for topical use by the . The feature of this machine: 1.Five kinds of wavelength (808nm，650nm，630nm，580nm, 460nm ). 2.Lasers and LED cold laser mixed in one helmet. Most of the laser hair regrowth machine in the market only has the 650nm laser. Or only LED. But our SH650-1 hair regrowth system combines two kinds of lasers and 3 kinds of LED. 3. Laser and LED lights are imported from Japan. We use higher quality Japanese laser and LED light. Energy is stable, lifetime is longer. 4.Oxygen spray pen. Used for clean and sterilize scalp. 5.Medicine spray pen. It can help the hair regrowth medicine like Minoxidil average on the scalp. 6.Micro-current massage comb. To help medicine absorbed faster, and do massage to the scalp. 7.Professional hair & Scalp analyzer. It can do the analysis for hair and scalp, save 2000 patients’ information, before and after photos (It has a camera to take photos), and print analysis report. 8. The system is very easy to operate. The work time for the 5 wavelengths is adjusted separated. Most the machine in the market has no Medicine spray pen, Micro-current comb, Oxygen sprayer, also no Hair& Scalp analyzer. Contact with us: Contact Person: Alex Song, Sunny Zhao E-mail: Alex@sanolasers.com   Sunny@sanhebeauty.net Whatsapp: +86 15321516360    +86 18813196949

Theory Use of HI-EMT: A specific range of frequencies that do not allow the muscle to relax between successive stimuli,forcing the muscle to remain contractive for several seconds.Muscle formation occurs when muscle tissue is repeatedly exposed to these high load conditions. Studies have shown that abdominal muscle thickness increases by an average of 15-16% one to two months aftertreatment with HI-EMT Application Exercise the abdominal muscles, shape the vest line, exercise the buttocks muscles, create peach hips, forge the chain oblique muscles, and shape the mermaid line. Shape the vest line by improving the abdominal muscles that have become loose due to rectus abdominis. It is especially suitable for post-partum mothers who have increased abdominal circumference due to separation of rectus abdominis muscles and loose belly. Advantages: 1.Building muscles and burn fat together 2.Non-invasive hip lifting 3.Suitable for everyone-no anesthesia-nosurgery 4. Short-term treatment, one time 30 minutes 5. Only 4 sessions are required between 2-3 days 6.Feels like an intensive exercise 7.Safe without downtime 8. The result is immediate, but it will be noticeable after two to four weeks. 9.Muscle mass increased by an average of 16% 10.Average fat loss 19% Core principles Treatment course 1. 2-3 times a week, 4-6 times as a treatment course. 2. 4-6 treatment courses are best. Depending on the customer's physical condition, obese or long-term non-exercise customers can increase the treatment course. 3. The best effect is 2-4 weeks after treatment. Some people will feel tight muscles just after finishing 4. Additional treatments at intervals of 2-3 months can maintain the most maintained effect Machine in treatment Effect description Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service. Contact with us:  Contact Person: Sunny Zhao, Daria Jia E-mail: Sunny@sanhebeauty.com,   Daria@sanhebeauty.net Whatsapp: +86 18813196949  +86 18831450595

Product Pricinple Utilizing the explosive effect of the Picosecond Nd: YAG laser, the laser permeate the epidermis into the dermis which includes amount of pigment mass. Since the laser pulses in picosecond but with super high energy, the shot pigment mass swell quickly and breaks into small pieces, which will be eliminated through metabolic system. Indications 1. Freckles, sunburn, age spots, chloasma, liver spots, dermal spots, etc. 2. Skin rejuvenation and whitening, narrow pores 3. Uneven skin tone 4. Acne marks 5. Red and black moles 6. Tattoos, red and blue eyebrows tattoo Laser type Portable Pico second ND: YAG Laser Energy Level 100- 800mj Pulse width 2000ps wavelength 1064nm,532nm Frequency 1-20Hz adjustable Spot size 1-5mm Cooling system Water circulation refrigeration system + semiconductor refrigeration Dimension 94*60*62cm weight 51KG   Advantages 1. imported handle pipe, not easy to broken 2. Active q-switch Pico second laser technology 3. 1064nm and 532nm treatment head can be changed 4. the frequency is 1-20hz adjustable Treatment Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service. Contact with us:  Contact Person: Sunny Zhao, Alex Song E-mail: Sunny@sanhebeauty.com,   Alex@sanolasers.com Whatsapp: +86 18813196949  +86 15321516360

Working principle According to the principle of selective photopyrolysis, when shorted the action time of the laser, the laser energy diffuses less to the surrounding tissue. If the energy is limited to the target that needs treatment, the surrounding normal tissue can be protected, so the selectivity of treatment become stronger.The picosecond laser pulse width is only 1% of the traditional Q-switched laser. Under this ultra-short pulse width, the light energy is too late to be converted into heat energy, and there is almost no photothermal effect.When the laser energy is absorbed by the target, its volume will expand rapidly, and then be blasted and torn into pieces. "The picosecond laser is more powerful and complete in crushing pigment particles and less damaging the surrounding tissue." From the perspective of treatment, the effective rate can reach more than 94% (Ota nevus almost 100%). Indications 1. Freckles, sunburn, age spots, chloasma, liver spots, dermal spots, etc. 2. Skin rejuvenation and whitening, narrow pores 3. Uneven skin tone 4. Acne marks 5. Red and black moles 6. Tattoos, red and blue eyebrows tattoo Treatment advantage (1) High energy & short pulse duration: Energy can be released into the skin tissue in trillions of trillions of seconds, which can break down the pigment into smaller pieces. Compared with the traditional Q: switch laser, the pigment can be absorbed more easily and faster. (2) Low risk & painless: Since the pulse duration has been reduced a thousand times, skin damage has been reduced. Treatment is safer and less painful. (3) There was no anesthesia and inflammation during the treatment. (4) Fast： For tattoo removal, traditional Q: switching lasers usually require 6-8 treatments. With a picosecond laser, only 3-4 treatments are needed to completely remove it. (5) High performance: Using picosecond laser technology can completely remove tattoos and pigments. (6) Try any skin type, no obvious pigmentation after treatment. . Laser type Pico second ND: YAG Laser Energy Level Single Mode: Max 400mj (532nm), Max 800mj (1064nm) Double Mode:Max 800mj(532nm), Max 1600mj (1064nm) Pulse width 750ps wavelength 1064nm,532nm,585nm(option),650nm(option) Frequency 1-10hz Spot size 2-10mm Dimension 107*50*118CM weight 115KG   Postoperative care 1.After treatment, there may be slight pain, white skin surface, epidermal bleeding, transient redness, swelling, blackening or even purpura. They can be absorbed by themselves without being too nervous.If there is a scab that will fall off on its own within 7--14 days, it should not be removed artificially, so as to avoid delaying skin healing and forming pigmentation. 2.Due to individual differences or climate changes, within a few days after treatment, the treatment area must not be in direct contact with water or other solutions to prevent infection. Try to eat less spicy food, excessive drinking, and smoking. 3.Very few individuals may have pigmentation on their skin after treatment, which usually subsides after 1-3 months. 4.After the operation, try to avoid activities in the sun and exposure, in order to avoid the production and increase pigmentation. Physical sunscreen works best 5.If any abnormal phenomenon is found after the operation, please go to the outpatient consultation and treatment in time. Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service. Alex Song                        Sunny Zhao                           Daria Jia Alex@sanolasers.com     Sunny@sanhebeauty.com    Daria@sanhebeauty.net   +86 15321516360            +86 18813196949                    +86-18831450595

HIFUSHAPE adopts high intensity focused Ultrasound(HIFU),which deliver focused energy at a precise depth and disrupts localized fat deposits.It‘s a non-invasive way for fat reduction and body contouring of the abdomens,thigns and flanks,which offers patients‘ satisfactory experience with impressive and long last effects. Application: Body slimming Body shaping. Fat buring machine Fat loss machine Slimming beauty machine Ultrasound cavitation slimming machine RF face lifting Treatment principle    High Intensity Focused Ultrasound penetrates focused and volumetric ultrasonic energy at precise depth (1.2 cm) in subcutaneous fat layers targeting fat tissue causing a non-thermal effect. The surrounding structures such as the epidermis, blood vessels and nerves will not be damaged. Meanwhile the metabolized contents (triglyceride, fatty acid) of cells will excrete outside body automatically through blood circulation and lymphatic drainage without harm to the human body. HIFU body slimming MachineAdvantages 1.Non-surgical treatment: no injection, no wound, no drugs, no anesthesia in the whole treatment process.  2.Safety: it selectively takes effects on the target fat cells, destroying the fat cells thoroughly,and then the fats cells are removed by the absorption and decomposition of human body’s natural endogenous metabolism. At mean time, the surrounding epidermis, blood vessels and nerves remain unharmed. There is no risk of infection and trauma. A safe body shaping is promised.  3.Intelligent design: Intelligent control, touch operation, visual interfaces, Easy to learn, safe and convenient. 4.Convenience:The whole treatment is comfortable, no need to wear a shaper corset, no down- time, without any affects to normal life and work. 5.Effective results: After one treatment, 2cm fat will be reduced; after 3 treatments, 5-8cm fatwill be removed. Remarkable slimming results without bounce. Machine screen HIFU Body slimming and face lifting machine before and after Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service. Contact with us:  Contact Person: Sunny Zhao, Alex Song E-mail: Sunny@sanhebeauty.com,   Alex@sanolasers.com Whatsapp: +86 18813196949  +86 15321516360

Body Slimming Machines – Cryolipolysis, Coolsculpting Cryolipolysis treatment is a non-invasive procedure, which uses a targeted cooling process to kill the fat cells underneath the skin, freezing them to the point of elimination. Only fat cells are frozen. Your healthy skin cells remain, well, healthy. No knives. Non suction hoses. No needles. No scars. Once crystallized, the fat cells die and are naturally eliminated from your body. The benefits of professional cryolipolysis machines Innovative, precise, controlled Technologies for Optimal Clinical Results Cryolipolysis Machines are precise, controlled – The temperature on different treatment area is controlled, the fat freezing handle can gently and effectively target fat cells under the skin to help the fat cells convert into solid. Exceptionally Versatile Cryolipolysis Slimming Machines are versatile: whether the fat is on your belly or on your arms or other parts of the body, the fat freezing machine will be the best. the abdomen and waist/love hand are the common areas treated by fat freezing machines, actually, the upper arms, inner thighs, saddlebags, banana rolls or even double chin can enjoy this fat freezing treatment. Pain-free & Safe Coolsculpting Machine For Sale In China is pain-free: it is a pain-free & safe method because it did not require any surgical procedures that are painful. It does not require any anaesthesia before the procedure, no blood wastage, no bandages, and no syringes. Besides, this popular treatment just requires anti-freeze membranes, which help you to protect your skin. Non-invasive The fat freezing, technically known as cryolipolysis, is a non-invasive technology of freezing fat cells to get rid of “love handles,” and other stubborn bulges of fat such as belly, abdomen, the fat of inner thigh etc. Contact with us: Contact Person: Alex Song, Sunny Zhao E-mail: Alex@sanolasers.com   Sunny@sanhebeauty.net Whatsapp: +86 15321516360    +86 18813196949

Functions Acne scar removal, wrinkle removal Stretch mark removal Large Pore Reduction, skin rejuvenation Face lifting, skin tightening, skin Resurfacing Pigmentation removal The Pinxel model is specially designed to deliver RF energy directly to the epidermis or dermis skin layer. This stimulates and re-models collagen effectively by either RF micro-needling mode (invasive) or RF matrix mode (non-invasive). Type RF, Microneedle RF machine RF output Max 50W Depth of needle 0.5-3mm (adjustable) Spot size 12*12mm (25pin for Microneedle RF) 20*20mm (49pin for Microneedle RF) 12*12mm (64pin for Fractional RF) Frequency 2MHz System type Bipolar&Mono polar Treatment heads Microneedle RF handle: invasive treatment for dermis and epidermis. 25pin and 49pin for choose. Fractional RF handle: Non invasive treatment for epidermis. 64pin for choose. Negative polar: work together with monopolar RF mode, strong power for body treatment. Advantages 1.Korea imported step motor 2.Combine Microneedle RF& Fractional RF 2 system in one machine 3.Bi-polar & Mono polar two treatment mode 4.25pins & 49pins,Insulated and Non-insulated needle cartridges  5.Top AFT industry power ensure stable energy Treatment Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service.

Working Theory According to the principle of selective photopyrolysis, when shorted the action time of the laser, the laser energy diffuses less to the surrounding tissue. If the energy is limited to the target that needs treatment, the surrounding normal tissue can be protected, so the selectivity of treatment become stronger.The picosecond laser pulse width is only 1% of the traditional Q-switched laser. Under this ultra-short pulse width, the light energy is too late to be converted into heat energy, and there is almost no photothermal effect.When the laser energy is absorbed by the target, its volume will expand rapidly, and then be blasted and torn into pieces. "The picosecond laser is more powerful and complete in crushing pigment particles and less damaging the surrounding tissue." From the perspective of treatment, the effective rate can reach more than 94% (Ota nevus almost 100%). Operation Steps 1、Clean the treatment area, if you have hair, you need to remove it 2、Apply anesthetic cream as needed 3、Disinfect the treatment area 4、Adjust the treatment parameters according to the parameter table 5、All treatments are recommended not to break the skin or ooze blood, which can greatly reduce the risk of melanin deposition, and the number of treatments will increase accordingly. 6. It is recommended to use repair products and products that inhibit pigmentation aftertreatment 7. After treatment, you must enter physical sunscreen, masks, umbrellas, etc. 8. The general treatment interval is about one month, the parameter table has the recommended number of treatments, and the doctor determines whether to add treatmentaccording to the patient's recovery.   Operation Steps 1、Clean the treatment area, if you have hair, you need to remove it 2、Apply anesthetic cream as needed 3、Disinfect the treatment area 4、Adjust the treatment parameters according to the parameter table 5、All treatments are recommended not to break the skin or ooze blood, which can greatly reduce the risk of melanin deposition, and the number of treatments will increase accordingly. When starting treatment, use low frequency first (let the machine warm up first to reduce the damage to the machine), and slowly close to the skin to continuously emit light. Then slowly raise up to find a suitable distance to start treatment. After a few minutes, you can increase the frequency. When you start treatment, you must first get close to the skin to continuously emit light, and then slowly raise the treatment head, so as to avoid the sound from scaring the patient It can also find the best treatment distance. When the blasting sound is the loudest, it is when the energy is focused. In many cases, the focused energy is not used, because the focused energy will bleed, and the probability of coloration is very large. Generally 2 minutes after treatment The skin will flush and the effect is best. Focusing on energy: The point with the greatest energy can be judged by listening to the sound, and the point where the sound is the loudest and the most brittle can be understood by beginners. 6.It is recommended to use repair products and products that inhibit pigmentation after treatment 7.After treatment, you must enter physical sunscreen, masks, umbrellas, etc. 8.The general treatment interval is about one month, the parameter table has the recommended number of treatments, and the doctor determines whether to add treatment according to the patient's recovery. Laser type Pico second ND: YAG Laser Energy Level Single Mode: Max 400mj (532nm), Max 800mj (1064nm) Double Mode:Max 800mj(532nm), Max 1600mj (1064nm) Pulse width 750ps wavelength 1064nm,532nm,585nm(option),650nm(option) Frequency 1-10hz Spot size 2-10mm Dimension 107*50*118CM weight 115KG   Treatment advantage (1) High energy & short pulse duration: Energy can be released into the skin tissue in trillions of trillions of seconds, which can break down the pigment into smaller pieces. Compared with the traditional Q: switch laser, the pigment can be absorbed more easily and faster. (2) Low risk & painless: Since the pulse duration has been reduced a thousand times, skin damage has been reduced. Treatment is safer and less painful. (3) There was no anesthesia and inflammation during the treatment. (4) Fast： For tattoo removal, traditional Q: switching lasers usually require 6-8 treatments. With a picosecond laser, only 3-4 treatments are needed to completely remove it. (5) High performance: Using picosecond laser technology can completely remove tattoosand pigments. (6) Try any skin type, no obvious pigmentation after treatment. Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service. Alex Song                        Sunny Zhao                           Daria Jia Alex@sanolasers.com     Sunny@sanhebeauty.com     Daria@sanhebeauty.net   +86 15321516360            +86 18813196949                    +86-18831450595

Working Therapy & Functions I-Cool Skin air cooler is intended to minimize pain and thermal injury during laser and dermatological treatments. It also provides temporary topical anesthetic relief during injections, tattoo application, tattoo removal, RF, laser hair removal and much more.  The device can assist in a variety of applications and is particularly useful with cosmetic procedures. Appearance introduction 1. Compressors imported from Japan 2. Super wind speed blower 3. Independent noise reduction system 4. -30°C super-low temperature refrigeration 5. 200g super light cold air tube 6. Stepless speed regulation, temperature adjustment knob 7. One-key start-stop button Operator station introduction 1. Stepless speed regulation, temperature adjustment knob 2. Temperature  indication（-4℃~-30℃） 3. Strat-Stop button Laser source: Stormfiber-II air cooling system Controlling screen: 2.4 inch multi color screen Cooling power: 1500W Temperature range: -4℃~-30℃(adjustable) Refrigerants: R404A Fan speed: 1~8 level (adjustable) Treatment Pipe: 2.5m Pipe weight: 200g Outlet adaptor size: Φ6mm  Φ10mm  10mm*1.5mm LCD Screen: 2.4 Inch Storage platform size: 450*280*20mm Machine size: 610*380*750mm    50KG Package size: 820-500-930mm    74KG Power source: AC/100-240 V, 50-60 Hz，10A Safety Class: EN60601-1,TypeB MDD/MPG,Class I  Adapters for Diode laser and IPL After inserted the connector assembly,The I-Cool could works with 808nm diode laser hair removal machine, co2 fractional laser machine, SHR machine, IPL machine and Nd yag laser machine...Suitable for all machines if patients feel pain and needs cooling procedure. Details Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service. Contact with us:  Contact Person: Sunny Zhao, Alex Song E-mail: Sunny@sanhebeauty.com,   Alex@sanolasers.com Whatsapp: +86 18813196949  +86 15321516360

fast fat freezing cryolipolysis Slimming machine with 4 cryolipolysis handles Functions: Cryolipolysis is a new, non-invasive way to gently and effectively Reduce fat in targeted areas of the body that results in a noticeable, Advanced looking fat reduction in the treated areas.As triglyceride In fats will be converted into solid in particular low temperatures ,it Uses a cooling technology to selectively target fat bulges and Eliminate fat cells through a gradual process that does not harm the Surrounding tissues , reduce unwanted fat.      The contact cooling of the hand piece surface regulates the temperature of the skin and protects fine dermal structures, realizing the fat Body-reshape effects while tightening skin!Cryo Slimming Machine Body Shape,Cryolipolysis Fat Freezing System,Cellulites Freezing Fat Beauty System. Advantages       No surgery, no anesthesia, no needles, no scarring, no downtime. Safer than liposuction. Special design for the handpiece, no any pain feeling when finished the treatment; Single treatment can reduce 20-40% reduction in the fat layer. Color touch screens work on both handpiece and machine together. The handpiece is allocated with a 3.5inch colorful touch screen.     Adjustable vacuum power, adjustable temp by software on both handle & machine. Deflate auto, reduce pain feeling when finish treatment.1-4 handpieces optional which can work together; 2 kinds of different size handles can well meet the different degree of fatness clients. Every handpiece has 10 medical germicidal lamps; Minimum -15℃, temperature can be shown on both interfaces and handles screen.     Safe and precise cooling function for comfortable treatment procedure; New vacuum pressure technology, pressure could be adjusted gradually with 4 modes; Modular design for easy maintenance. Screens in the machine and in the handpiece are simultaneously displayed. Input Power 1800W  Frozen head pressure 0-100kpa RF energy 1-50J/cm2 Cavitation energy 1-70J/cm2 Frozen head operation screen size 4.2 Inch RF frequency 10M Cavitation Frequency 40K   Treatment handle’s quantity 5units( Optional) Frozen head temperature 15-5℃ Cooling System Semiconductor Cooling + water-cooling + air cooling Fuse specification Ø5×25　10A Power AC220V±10%，10A，50HZ / AC110V±10A，60HZ   Super Strong Cooling System Powerful booster water pump with unique 8L big water tank,and Japanese import copper radiator with 4 big fans all ensure the machine can keep working continually 12 hours. Popular and Hot Design Smart and high standard design of the cryo machine will help to improve the image of your salons or clinics Touch Screen On Each Applicator Touch screen on the applicator mackes it easy to adjust the setting. Double Air Pumps When two applicatiors working simultaneously,a single pump is not enough,our machine equipped with two separate powerfull air pumps to guarantee enough vaccum pressure. Best Freeze-15℃ degree  Strong cooli ng system ensure the temperature reach- 15%℃,much lower than-10℃ currently in the current market Four Big Treatment Cryo Handles Three different sizes of 4 handles wich can apply to different parts of body according to the fat thickness of each clients.   Contact with us: Contact Person: Alex Song, Sunny Zhao E-mail: Alex@sanolasers.com   Sunny@sanhebeauty.net Whatsapp: +86 15321516360    +86 18813196949

SH650-1 laser hair loss treatment laser hair re-growth machine sano laser The patented SH-650 narrows light wavelengths and delivers EMS (electro-magnetic stimulation) to activate hair follicles, turning 80% from hibernation to active status to both stop hair loss and restore lost hair. Oil secretion regulation Excessive oil secretion also causes hair loss. Overactive or abnormal sebaceous glands secrete excessive amounts of oil, while Dihydro Testosterone Cave (DHT) in sebaceous gland oil causes hair follicle dwindling or even shrinking, thereby causing hair loss. SH-650 Hair Rejuvenation dredges sebaceous gland ducts, decreasing and controlling oil secretion for improved hair condition. Scalp health promotion for improved hair quality SH-650 composite hair mask treatment irradiates hair follicles, accelerates hair growth, strengthens hair elasticity, and increases hair density for maximum shine. Nutrient absorption SH-650 is a patented cold light source that doesn’t damage hair, using neither chemicals nor drugs yet penetrating is better either one. It overcomes the weakness various hair fluid chemicals face in being unable to fully penetrate the hair follicle root.             Name Mild Laser Hair Regrowth Machine Laser power output 650nm diode laser 320mw 808nm IR laser 2200mw                                                                 630nm Red cool light 1000mw                                                                460nm Blue Cool light 1000mw 580nm Yellow Cool light 2000mw Treatment Time 0-60min Pulsing time range 1-10s Pulsing delay range 0-10s Input power 200w LCD Screen 8-inch multi-color touch screen Device Dimension 1630*550*500 mm Package Dimension 1650*580*580 mm Input voltage rating AC230 10%,50Hz 1HzAC110V 10%,60Hz 1Hz (optional)   Contact with us: Contact Person: Alex Song, Sunny Zhao E-mail: Alex@sanolasers.com   Sunny@sanhebeauty.net Whatsapp: +86 15321516360    +86 18813196949

Introduction It is a first rate air cooling system developed for Pre, post and During the laser treatment without interfering the laser beam emission. It is designed for reducing pains, redness,swelling and thermal damages caused by lasertreatment, Intense Light (IPL) treatment and Radio frequency (RF) treatment Unlike other cooling methods, such as contact cooling, cryogen spray or ice packs, the ICOOL-3 can cool the epidermis before, during and after the laser energy has been applied, without interfering with the laser beam. Laser source: Stormfiber-II air cooling system Controlling screen: 2.4 inch multi color screen Cooling power: 1500W Temperature range: -4℃~-30℃(adjustable) Refrigerants: R404A Fan speed: 1~8 level (adjustable) Treatment Pipe: 2.5m Pipe weight: 200g Outlet adaptor size: Φ6mm  Φ10mm  10mm*1.5mm LCD Screen: 2.4 Inch Storage platform size: 450*280*20mm Machine size: 610*380*750mm    50KG Package size: 820-500-930mm    74KG Power source: AC/100-240 V, 50-60 Hz，10A Safety Class: EN60601-1,TypeB MDD/MPG,Class I Working Theory The 1500W high-power compressor provided by Danfoss ensures that the system can work continuously for a long time.The high-speed fan makes the air emit a strong cooling effect,and the fan automatically adjusts with the temperature setting.Self-defrosting is the best performance ofrefrigeration performance. The self-draining system ensures safe and clean use. The support rod device of the blowing pipe makes the operation more comfortable. Advantages: (1) HIGHLY Compressor Imported from Japan and DUPONT environmentally friendly refrigerant R134a; (2) Ultra-low temperature refrigeration -30 degrees (3) Applicable to foreign machines (same size as ZIMMER and foton) (4) 2.5mm length and 200g weight of the air pipe are more flexible; (5) 5.1L large capacity bellows, sustainable ultra-low temperature treatment (6) Dedicated bracket for easy operation with orientation (7) 2.4-inch true color touch screen, visual human-machine interface Adapters for Diode laser and IPL After inserted the connector assembly,The I-Cool could works with 808nm diode laser hair removal machine, co2 fractional laser machine, SHR machine, IPL machine and Nd yag laser machine...Suitable for all machines if patients feel pain and needs cooling procedure. Best  partner: After inserted the connector assembly,The I-Cool could works with 808nm diode laser hair removal machine, co2 fractional laser machine, SHR machine, IPL machine and Nd yag laser machine...Suitable for all machines if patients feel pain and needs cooling procedure Precautions of using (1) The temperature setting can be adjusted 8 minutes after starting; (2) The interface only displays the set temperature, not the actual temperature; (3) The wind speed can be adjusted automatically according to the temperature setting, the lower the temperature, the higher the wind speed; (4) Observe the water level before using the machine. If the water tank is full, drain it in time; (5) The instrument cannot be transported upside down, and it must be left for two hours before it can be used Details CE Certificate Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service. Contact with us:  Contact Person: Sunny Zhao, Daria Jia E-mail: Sunny@sanhebeauty.com,  Daria@sanhebeauty.net Whatsapp: +86 18813196949  +86 18831450595