Application of SHR-950B Lasting  Hair Removal the unwanted hair under arms, legs, lips, or other body parts. Skin Rejuvenation shrink pores, tighten skin, improve skin elasticity and glossiness. Pigmentation Removal removes various kinds of pigment such as freckles, chloasma, age spots,    sunburn, etc. Acne Clearance SHR-950B Working Theory SHR-950B is a revolutionary technology for IPL Hair removal treatment. The traditional IPL treat your skin with high amounts of Joules (energy), SHR-690 shots multiple shots but at low amounts of Joules. SHR mode gently heats the hair follicles. Clients feel only warmth and a slight tingling sensation, some even comparing it to a light massage. The system also utilizes In-Motion technology, where the hand piece is always in motion over the skin. System Advantages and Feature The system combines diode laser hair removal working modes  includes SHR working mode to deliver multiple shots but at low amounts of energy,to achieve practically painless results. The system combined with “In Motion”represents a breakthrough in permanent hair removal with light technology.The treatment is more pleasant than with conventional systems and skin is better protected The system is suitable for all skin types, even tanners; Unlike traditional Laser and IPL, SHR can be had all year round without having to hide from the sun. The system utilizes an imported flash lamp with a 300,000 shot life span. Difference Traditional SHR 950BAdvantage Advantage Wavelength 650-1200nm  (HR) 560-1200mm (SR) 650-950nm(HR) 560-950nm(SR) SHR-950B filters both violet light and infrared light which can eradiate and absorb large volumes of water from the skin. Auto identified hand piece Unavailable Available Identified hand piece, HR &SR. The system can enter into correct operation menu directly when you insert the hand piece. Identified function makes the operation simple and treatment safe. Frequency 0.3-1Hz 1-8Hz Which speeds up the operation and reduces treatment time. Work mode Stationary mode Stationary mode & Moving mode Compared with traditional IPL treatment, only 1/8 as much time is needed for treatment of arms, legs, and back. Water circuit monitor Unavailable Available Water temperature, water level, and water flow sensors ensure the hand piece will not burn patients. Stain resistant water circle Unavailable Available Stain resistant water circuit system makes sure no components rust, keeping the crystal and filters clean and ensuring the equipment has a long lifespan. Water lock connector Unavailable Available Treatment head connector with water-lock for safe and easy changing, even with only single treatment head use is allowed. About us Established in 2005, Beijing sano Beauty S & T Co., Ltd takes the leading in applying advanced laser and Intense light technology in medical and beauty industry. Now we developed Mona IPL series, E-light, Co2 fractional laser, 808nm diode laser, ultrasonic cavitations, fractional RF and hair re-growth laser. With efficient R & D team, mass production ability and reliable quality control system, Beijing Sanhe Beauty  supplies the OEM & ODM service and help our clients build up their own reputation and more competitive in the market. All the process of the producing is under ISO13485 Quality system and match with CE certification request. Beijing Sanhe Beauty will work hard constantly for supplying best product and after sale service. Contact  us Alex Song                              Sunny Zhao  Alex@sanolasers.com        Sunny@sanhebeauty.net  +86 15321516360                  +86 18813196949

Functions HIDL-808-2000 utilize the 808nm diode laser, combine with 2000W high power treatment head. Which can do the hair removal treatment for any skin type and hair type effectively. So this machine is popular in Hair clinic, beauty salon etc. Base on the theory that the light can be selective absorption. The 808nm diode laser can penetrate into the deep skin. Then delivery the laser energy into the hair follicle and destroy that directly. So there is a good result for hair removal. Specifications:  Laser type High Intensity 808nm diode laser Laser handle output power 1200W Total power 3200W Laser wavelength 808nm Sapphire size (Spot size) 12*12mm Shots Guarantee 2 years no limited Treatment head temperature Max -16 degree Frequency 1-10 Hz Display 10.4 Inch Package size 82*55*120CM Gross weight 82 KG Advantages: 1.USA Imported coherent laser bar is more stable. And 1200W high power output laser energy can achieve the best hair removal. 2.Low investment and high return. The treatment head is guaranteed for 2 years with No limitation. 3.The constant temperature refrigeration module keeps the water temperature at about 20-25 degrees, which can ensure the system to work continuously for 48hours without stop. 4.Using advanced TEC and sapphire contact cooling technology, the terminal temperature is controlled under 5 ° C, and the skin is properly cooled during the hair removal process, while ensuring the possibility of zero frostbite. 5.The frequency reaches 10hz, the treatment is more fast. Certificate: FDA, Medical CE Machine in treatment:      Before and after treatment photos: Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service.

Cryolipolysis slimming and body shaping machine sano laser Applications 1. Cellulite Reduction 2. Circumferential Reduction 3. Face & Body Reshaping, Body shaping 4. Wrinkle & Eye Pouch Improving,Wrinkle removal 5. Massage, Whole Body Deep Massage ultras 6. Body circumference reduction 7. Skin tightening,Skin surface smooth,Eyelid area treatment 8. Fat burning, Weight loss 9. Orange peel-like skin therapy Machine advantages: Combining Cryolipo, Cavitation and RF 3 technologies in one; with 5 treatment handles for whole body treatment. 8 Peltier cooling plates inside the handle, making sure the lowest treatment temperature can reach -15℃. Super strong cooling system with 8L water tank, copper radiator and DC cooling fans ensures a 12 hours continous working of the machine. Double air pump and Japan imported magnetic valves guarantee a strong and stable vacuum intensity. Contact with us: Contact Person: Alex Song, Sunny Zhao E-mail: Alex@sanolasers.com   Sunny@sanhebeauty.net Whatsapp: +86 15321516360    +86 18813196949

Different treatment handle Handle Recommended use area     Arms, thighs, calves     Abdomen, buttocks, thighs Different mode: Treatment course 1. 2-3 times a week, 4-6 times as a treatment course. 2. 4-6 treatment courses are best. Depending on the customer's physical condition, obese or long-term non-exercise customers can increase the treatment course. 3. The best effect is 2-4 weeks after treatment. Some people will feel tight muscles just after finishing 4. Additional treatments at intervals of 2-3 months can maintain the most maintained effect Treatment pictures Contact with us:  Contact Person: Sunny Zhao, Alex Song E-mail: Sunny@sanhebeauty.com,   Alex@sanolasers.com Whatsapp: +86 18813196949  +86 15321516360

Picosecond nd yag laser system principle: The energy of  Picosecond laser can be absorbed by the blue and black melanin. The melanin will be fragmented so small that they can be metabolized by the lymphatic system or digested out of body. Thus the tattoo or other pigmentation will be removed without damage to the normal tissue. The treatment is safe and convenient without downtime and side effects. Indications Freckles, sunburn, age spots, chloasma, liver spots, dermal spots, etc. Skin rejuvenation and whitening, narrow pores Uneven skin tone Acne marks Red and black moles Tattoos, red and blue eyebrows tattoo Operation Steps 1、Clean the treatment area, if you have hair, you need to remove it 2、Apply anesthetic cream as needed 3、Disinfect the treatment area 4、Adjust the treatment parameters according to the parameter table 5、All treatments are recommended not to break the skin or ooze blood, which can greatly reduce the risk of melanin deposition, and the number of treatments will increase accordingly. When starting treatment, use low frequency first (let the machine warm up first to reduce the damage to the machine), and slowly close to the skin to continuously emit light. Then slowly raise up to find a suitable distance to start treatment. After a few minutes, you can increase the frequency. When you start treatment, you must first get close to the skin to continuously emit light, and then slowly raise the treatment head, so as to avoid the sound from scaring the patient It can also find the best treatment distance. When the blasting sound is the loudest, it is when the energy is focused. In many cases, the focused energy is not used, because the focused energy will bleed, and the probability of coloration is very large. Generally 2 minutes after treatment The skin will flush and the effect is best. Focusing on energy: The point with the greatest energy can be judged by listening to the sound, and the point where the sound is the loudest and the most brittle can be understood by beginners. 6.It is recommended to use repair products and products that inhibit pigmentation after treatment 7.After treatment, you must enter physical sunscreen, masks, umbrellas, etc. 8.The general treatment interval is about one month, the parameter table has the recommended number of treatments, and the doctor determines whether to add treatment according to the patient's recovery. Postoperative care 1.After treatment, there may be slight pain, white skin surface, epidermal bleeding, transient redness, swelling, blackening or even purpura. They can be absorbed by themselves without being too nervous.If there is a scab that will fall off on its own within 7--14 days, it should not be removed artificially, so as to avoid delaying skin healing and forming pigmentation. 2.Due to individual differences or climate changes, within a few days after treatment, the treatment area must not be in direct contact with water or other solutions to prevent infection. Try to eat less spicy food, excessive drinking, and smoking. 3.Very few individuals may have pigmentation on their skin after treatment, which usually subsides after 1-3 months. 4.After the operation, try to avoid activities in the sun and exposure, in order to avoid the production and increase pigmentation. Physical sunscreen works best 5.If any abnormal phenomenon is found after the operation, please go to the outpatient consultation and treatment in time. Alex Song                        Sunny Zhao                           Ruby Mu Alex@sanolasers.com     Sunny@sanhebeauty.net     ruby@sanhebeauty.net   +86 15321516360            +86 18813196949                    +86-17633631496

RF skin tightening machine microneedling rf needle face face lifting machine Application * Remove wrinkle, skin tightening * Pigment and acne treatment * Lighten the scar or acne scar, make pore smaller * Skin rejuvenation, make skin more lighten and smooth * Lighten stretch marks Features:   1. Pinxel-2 has four handles, Fractional RF handle (Non-invasive), Micro-needle RF handle (invasive), a cooling head, and a negative polar. 2. This machine is used for acne, scar, wrinkle, pigmentation removal, Skin Resurfacing, Large Pore Reduction and skin rejuvenation, face lifting, skin tightening. 3: This machine has Bipolar mode and Mono-polar mode two treatment mode, Most of China RF machine only has bi-polar mode. In Mono-polar mode, the RF energy is stronger. If using Mono-polar mode, the patient need to hold the negative polar handpiece Advantages: 1: It has insulated and non-insulated needle tips, two needle types for the doctor to choose. (25 pins insulated, 25 pins non-insulated, 49 insulated and 49 pins non-insulated needle tip) 2: The depth of the needle are adjustable on screen, 0.5mm-3mm. 0.5-1.0mm used for eye around, 1.0-2.0mm used for face treatment. 2.0-3.0mm used for body treatment. 3: There are 25 pins, 49 pins needle tips, insulated tips and non-insulated tips. 4: It uses Korea imported step motor. The needles are stronger, can come into skin more easily. In China, only Sanhe use this kind of motor. 5: It has a cooling head. Used for after-treatment care. Most other similar machines have no cooling head Contact with us: Contact Person: Alex Song, Sunny Zhao E-mail: Alex@sanolasers.com   Sunny@sanhebeauty.net Whatsapp: +86 15321516360    +86 18813196949

About  us Our sales team are well trained and highly experienced in specific and specialized areas of product range. Thus providing customers with strong product knowledge and service support. We provide step by step operation instruction containing helpful tips and advice directly from our service team. From your initial contact with our sales team, to the delivery and use of our products, we offer  training, customer service, and technical support to meet your needs. All this helps ensure you get the best and most professional results every time. Picosecond nd yag laser system principle: The energy of  Picosecond laser can be absorbed by the blue and black melanin. The melanin will be fragmented so small that they can be metabolized by the lymphatic system or digested out of body. Thus the tattoo or other pigmentation will be removed without damage to the normal tissue. The treatment is safe and convenient without downtime and side effects. Preoperative skin care It could using 4% hydroquinone mixture and Vitamin A to do skin bleaching that could prevent skin from severe dehydration before surgery 3-4 weeks. for Type 1 or  there is no need to use these drugs if it is type 1 or type 2. It is necessary for skin type 3 and 4. If you want to carry out a large area of regeneration or grinding, you can use sedative drugs before treatment, so that make patients relax. One hour before surgery, clean the area with lidocaine (a local anesthetic), then cover the plastic wrap to promote absorption. In addition to the use of lidocaine before the treatment and gel , also need to increase the skin moisture to make laser treatment more refined to reduce the damage during treatment. Energy 100-800mJ adjustable Frequency 1-20Hz adjustable The energy is 100-300 mj, and the frequency is adjustable from 1-20Hz; The energy is 350-550 mj, the frequency is adjustable from 1-15Hz; The energy is 600-800mj, the frequency is 1-10Hz adjustable COUNT Current count,It will be cleared when you click once; click Count to display the total points used SIMMER ready signal；when SIMMER turn to green, you can click the working.                  WORKING When WORKING lights up, step on the foot switch to emit light Contact  us: Alex Song                       Sunny Zhao                          Ruby Mu  Alex@sanolasers.com   Sunny@sanhebeauty.net     ruby@sanhebeauty.net  +86 15321516360          +86 18813196949               +86 17633631496

fast fat freezing cryolipolysis Slimming machine with 4 cryolipolysis handles Functions: Cryolipolysis is a new, non-invasive way to gently and effectively Reduce fat in targeted areas of the body that results in a noticeable, Advanced looking fat reduction in the treated areas.As triglyceride In fats will be converted into solid in particular low temperatures ,it Uses a cooling technology to selectively target fat bulges and Eliminate fat cells through a gradual process that does not harm the Surrounding tissues , reduce unwanted fat.      The contact cooling of the hand piece surface regulates the temperature of the skin and protects fine dermal structures, realizing the fat Body-reshape effects while tightening skin!Cryo Slimming Machine Body Shape,Cryolipolysis Fat Freezing System,Cellulites Freezing Fat Beauty System. Advantages       No surgery, no anesthesia, no needles, no scarring, no downtime. Safer than liposuction. Special design for the handpiece, no any pain feeling when finished the treatment; Single treatment can reduce 20-40% reduction in the fat layer. Color touch screens work on both handpiece and machine together. The handpiece is allocated with a 3.5inch colorful touch screen.     Adjustable vacuum power, adjustable temp by software on both handle & machine. Deflate auto, reduce pain feeling when finish treatment.1-4 handpieces optional which can work together; 2 kinds of different size handles can well meet the different degree of fatness clients. Every handpiece has 10 medical germicidal lamps; Minimum -15℃, temperature can be shown on both interfaces and handles screen.     Safe and precise cooling function for comfortable treatment procedure; New vacuum pressure technology, pressure could be adjusted gradually with 4 modes; Modular design for easy maintenance. Screens in the machine and in the handpiece are simultaneously displayed. Input Power 1800W  Frozen head pressure 0-100kpa RF energy 1-50J/cm2 Cavitation energy 1-70J/cm2 Frozen head operation screen size 4.2 Inch RF frequency 10M Cavitation Frequency 40K   Treatment handle’s quantity 5units( Optional) Frozen head temperature 15-5℃ Cooling System Semiconductor Cooling + water-cooling + air cooling Fuse specification Ø5×25　10A Power AC220V±10%，10A，50HZ / AC110V±10A，60HZ   Super Strong Cooling System Powerful booster water pump with unique 8L big water tank,and Japanese import copper radiator with 4 big fans all ensure the machine can keep working continually 12 hours. Popular and Hot Design Smart and high standard design of the cryo machine will help to improve the image of your salons or clinics Touch Screen On Each Applicator Touch screen on the applicator mackes it easy to adjust the setting. Double Air Pumps When two applicatiors working simultaneously,a single pump is not enough,our machine equipped with two separate powerfull air pumps to guarantee enough vaccum pressure. Best Freeze-15℃ degree  Strong cooli ng system ensure the temperature reach- 15%℃,much lower than-10℃ currently in the current market Four Big Treatment Cryo Handles Three different sizes of 4 handles wich can apply to different parts of body according to the fat thickness of each clients.   Contact with us: Contact Person: Alex Song, Sunny Zhao E-mail: Alex@sanolasers.com   Sunny@sanhebeauty.net Whatsapp: +86 15321516360    +86 18813196949

Functions P-MIX 755 808 1064nm Diode laser hair removal machine is mainly for professional hair removal. Such as permanently remove lip hair, beard hair, chest hair, armpit hair, limbs hair and unwanted hair on any parts of body. It is suitable for all skin and hair types. the P-MIX combine 3 wave laser well. Each wave have its advantage: The 755nm used for light hair and blond hair removal. The 808nm have a good result for most skin types and hair colors. The 1064nm is suitable for black skin hair removal. Specifications:  Laser type High Intensity 808nm diode laser Laser handle output power 1200W Total power 3200W Laser wavelength 755+808+1064nm Sapphire size (Spot size) 12*12mm Shots Guarantee 2 years no limited Treatment head temperature Max -16 degree Frequency 1-10 Hz Display 10.4 Inch Package size 82*55*120CM Gross weight 82 KG Advantages: 1.USA Imported coherent laser bar is more stable. And 1200W high power output laser energy can achieve the best hair removal. 2.Low investment and high return. The treatment head is guaranteed for 2 years with No limitation. 3.The constant temperature refrigeration module keeps the water temperature at about 20-25 degrees, which can ensure the system to work continuously for 48hours without stop. 4.Using advanced TEC and sapphire contact cooling technology, the terminal temperature is controlled under 5 ° C, and the skin is properly cooled during the hair removal process, while ensuring the possibility of zero frostbite. 5.The frequency reaches 10hz, the treatment is more fast. Certificate: FDA, Medical CE Machine in treatment:      Before and after treatment photos: Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service.