4 cryo handles Cryolipolysis slimming machine fat reduction body shaping This procedure can reduce unwanted abdominal fat, love handles (flanks), and back fat. When fat cells are exposed to precise cooling, they trigger a process of natural removal that gradually reduces the thickness of the fat layer. And the fat cells in the treated area are gently eliminated through the body’s normal metabolism process, to eliminate unwanted fat. Through the freezing effect, remove the fat cell triglyceride off heat, and will remain at 4 ℃, so the cold coagulation, and therefore premature aging and death. Fat cells in the cold, will start clearing the natural decomposition process, so that gradually thinner fat layer. Through the normal metabolic processes, decreasing the fat layer, to achieve the purpose of partial melting fat. Fat cells can be significantly reduced, the fat layer also will become thinner, so that the fat blocks will be killed one by one. Cooling Skin protection while lifting and tightening. The contact cooling of the handpiece surface regulates the temperature of the skin and protects fine dermal structures, realizing the fast body-reshape effects while tightening skin! System Advantages Double touch screen Controls:  10.4 inch multi color touch screen controlling on main body 4.2 inch multi color touch screen control on hand piece Data based working program: According to the fat thicknees and heart rate measured before treatment, The fixed  treatment parameter setting is suggested. Also the parameter can be changed by operator Hand hold Emergency off button: For avoiding patient uncompfortable reaction, the patient can shut down the treatment immidiately by hand hold emergency off button. Heart rate meter: Test the heart rate before the treatment to make sure the patient is safe for accepting the cryolipolysis treatment. Hear rate lower than 50 and higher than100 is not suitable for the treatment. Supper strong cooling system: 1000w semicongductor cooling system to make sure the temperator              is dedicating control and lower enough for best result. Software vacuum control:  dedicating and adjustable vacuum control to make sure the treatment more safe and effective. Special designed program: Heat up the tissue with fixed time before cryolipo treatment start to avoid treatment area swelling seriously.   Indications The system can be treated: Body shaping: Shaping of the four limbs, buttocks, abdomen, recovery of Postpartum and liposuction surgery. Stretch marks: eliminate stretch marks efficiently Body sliming: reduce the cellulite, reduce the fat, improve skin laxity Contra-indication Pregnant woman The patient who has the heart bypass surgery. Heart disease Hypertension   Contact with us: Contact Person: Alex Song, Sunny Zhao E-mail: Alex@sanolasers.com   Sunny@sanhebeauty.net Whatsapp: +86 15321516360    +86 18813196949  

The advantages of hair removal ♦The pain of laser hair removal is relatively small ♦The best hair removal effect, hair removal is very complete, Laser effect on the hair follicles in different depth to remove the hair effectively forever ♦Laser hair removal treatment can not be the same as the traditional hair removal method, after treatment, there will be the pigmentation in the skin surface, because the skin absorb less laser ♦The cooling systems can reduce the heat produced in the treatment to protect the skin The advantages of skin rejuvenation ♦Laser skin rejuvenation is highly safe ♦Remarkable effect, after 7 days of skin rejuvenation, there will be obvious changes in the skin ♦Solve many aspects of skin problems, coarse pores, fine lines, scars, stains, acne, freckles and so on ♦Laser rejuvenation does not hurt the face of the skin on the basis of the no pain, not swollen treatment effect About Treatment （1）All cosmetic treatment should be done before consultation, protection, camera, etc., patients need to have the right attitude toward the treatment （2）Cleaning the treatment area,  patients need to be off the jewelry （3）Taking a skin test before the treatment, choose the area without the effect on appearance, such as ears, apply the Cold gel on the testing skin , adjust the energy about 2-3 spots. After 3min, observe the treatment area, if there is redness, it is the suitable energy. （4）After skin test, apply the cold gel in the treatment area about, use the suitable energy to do treatment. Do not press the skin during the treatment. （5）Before the hair removal treatment, shave the hair until 1-2mm, the treatment process is same as above. （6）According to the normal physiological process, the interval time is 21 days. The whole treatment should be 3-5 times.  Contact  us Alex Song                       Sunny Zhao                      Ruby Mu  Alex@sanolasers.com   Sunny@sanhebeauty.net    ruby@sanhebeauty.net  +86 15321516360                 +86 18813196949          +86 17633631496

Functions Acne scar removal, wrinkle removal Stretch mark removal Large Pore Reduction, skin rejuvenation Face lifting, skin tightening, skin Resurfacing Pigmentation removal The Pinxel model is specially designed to deliver RF energy directly to the epidermis or dermis skin layer. This stimulates and re-models collagen effectively by either RF micro-needling mode (invasive) or RF matrix mode (non-invasive). Type RF, Microneedle RF machine RF output Max 50W Depth of needle 0.5-3mm (adjustable) Spot size 12*12mm (25pin for Microneedle RF) 20*20mm (49pin for Microneedle RF) 12*12mm (64pin for Fractional RF) Frequency 2MHz System type Bipolar&Mono polar Treatment heads Microneedle RF handle: invasive treatment for dermis and epidermis. 25pin and 49pin for choose. Fractional RF handle: Non invasive treatment for epidermis. 64pin for choose. Negative polar: work together with monopolar RF mode, strong power for body treatment. Advantages 1.Korea imported step motor 2.Combine Microneedle RF& Fractional RF 2 system in one machine 3.Bi-polar & Mono polar two treatment mode 4.25pins & 49pins,Insulated and Non-insulated needle cartridges  5.Top AFT industry power ensure stable energy Treatment Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service.

Picosecond nd yag laser system principle: The energy of  Picosecond laser can be absorbed by the blue and black melanin. The melanin will be fragmented so small that they can be metabolized by the lymphatic system or digested out of body. Thus the tattoo or other pigmentation will be removed without damage to the normal tissue. The treatment is safe and convenient without downtime and side effects. Indications Freckles, sunburn, age spots, chloasma, liver spots, dermal spots, etc. Skin rejuvenation and whitening, narrow pores Uneven skin tone Acne marks Red and black moles Tattoos, red and blue eyebrows tattoo Operation Steps 1、Clean the treatment area, if you have hair, you need to remove it 2、Apply anesthetic cream as needed 3、Disinfect the treatment area 4、Adjust the treatment parameters according to the parameter table 5、All treatments are recommended not to break the skin or ooze blood, which can greatly reduce the risk of melanin deposition, and the number of treatments will increase accordingly. When starting treatment, use low frequency first (let the machine warm up first to reduce the damage to the machine), and slowly close to the skin to continuously emit light. Then slowly raise up to find a suitable distance to start treatment. After a few minutes, you can increase the frequency. When you start treatment, you must first get close to the skin to continuously emit light, and then slowly raise the treatment head, so as to avoid the sound from scaring the patient It can also find the best treatment distance. When the blasting sound is the loudest, it is when the energy is focused. In many cases, the focused energy is not used, because the focused energy will bleed, and the probability of coloration is very large. Generally 2 minutes after treatment The skin will flush and the effect is best. Focusing on energy: The point with the greatest energy can be judged by listening to the sound, and the point where the sound is the loudest and the most brittle can be understood by beginners. 6.It is recommended to use repair products and products that inhibit pigmentation after treatment 7.After treatment, you must enter physical sunscreen, masks, umbrellas, etc. 8.The general treatment interval is about one month, the parameter table has the recommended number of treatments, and the doctor determines whether to add treatment according to the patient's recovery. Postoperative care 1.After treatment, there may be slight pain, white skin surface, epidermal bleeding, transient redness, swelling, blackening or even purpura. They can be absorbed by themselves without being too nervous.If there is a scab that will fall off on its own within 7--14 days, it should not be removed artificially, so as to avoid delaying skin healing and forming pigmentation. 2.Due to individual differences or climate changes, within a few days after treatment, the treatment area must not be in direct contact with water or other solutions to prevent infection. Try to eat less spicy food, excessive drinking, and smoking. 3.Very few individuals may have pigmentation on their skin after treatment, which usually subsides after 1-3 months. 4.After the operation, try to avoid activities in the sun and exposure, in order to avoid the production and increase pigmentation. Physical sunscreen works best 5.If any abnormal phenomenon is found after the operation, please go to the outpatient consultation and treatment in time. Alex Song                        Sunny Zhao                           Ruby Mu Alex@sanolasers.com     Sunny@sanhebeauty.net     ruby@sanhebeauty.net   +86 15321516360            +86 18813196949                    +86-17633631496

Introduction of ICOOL ICOOL is a first rate air cooling system developed for Pre, post and During the laser treatment without interfering the laser beam emission. ICOOL is designed for reducing pains, redness, swelling and thermal damages caused by laser treatment,  Intense Light (IPL) treatment and Radio frequency (RF) treatment   ICOOL Working Theory 1. Laser hair removal by diode laser, IPL, Long pulse Nd:yag laser or alesandrite laser. 2. Radio frequency High frequency skin rejuvenation treatments. 3. Temporary anesthesia before injections 4. Feature of ICOOL system 5. Powerful cooling air temperature (-30C) 6.High power compressor makes the system work for long time continuously (Lowest temperature can keep 2 hours under 4 level fan speed) 7. High speed fans makes air emitting strong for better cooling result, 6 degree cooling fan speeds for various treatment. 8. Self defrosting system for best cooling performance 9. Self water drainage system make safe and cleaning performance 10. Fuse supporter make the procedure comfortable Skin cooler specification: laser source ICOOL air cooling system  Controlling screen 5 inch multi color touch screen Power 1000W Temperature range -4 ℃~-20 ℃(adjustable) Fan speed 1~6 (adjustable) Defrosting time 15s Power requirement 110V,50hz,3A, 220V,50hz, 3A Net weight 62kg Treatment Fuse 2 meters Fuse supporter 3 joint supporter Dimension of system 810*400*845mm Package size 915*515*1050mm Contact with us:  Contact Person: Sunny Zhao, Alex Song E-mail: Sunny@sanhebeauty.com,   Alex@sanolasers.com Whatsapp: +86 18813196949  +86 15321516360

Applications: Tattoo removal: Blue, black, red, yellow, green or brown tattoos; lip line or eyebrow line pigmentation Dermal pigmentation: Birth marks: Ota nevus, Ito nevus, black nevus, etc. Pigmentation: sun-burn spots, age spots, speckles,  freckles, senior flecks, etc. Epidermal pigmentation: such as  freckle, senior flecks, coffee spot .... Vascular  lentigines: vascular lesions, spider vessels, spider veins Skin rejuvenation, carbon peeling Principle: According to the principle of selective photopyrolysis, when shorted the action time of the laser, the laser energy diffuses less to the surrounding tissue. If the energy is limited to the target that needs treatment, the surrounding normal tissue can be protected, so the selectivity of treatment become stronger. The picosecond laser pulse width is only 1% of the traditional Q-switched laser. Under this ultra-short pulse width, the light energy is too late to be converted into heat energy, and there is almost no photothermal effect.When the laser energy is absorbed by the target, its volume will expand rapidly, and then be blasted and torn into pieces. "The picosecond laser is more powerful and complete in crushing pigment particles and less damaging the surrounding tissue." From the perspective of treatment, the effective rate can reach more than 94% (Ota nevus almost 100%). Machine advantages: ♦ 7 jointed arm delivery system, make it easy for longtime treatment. ♦ Spot size(2-10nm) can be adjusted through forcus ajdustment lens. ♦ Single and double pulses can be adjusted by the screen, the wavelength change is 1064 / 532nm. ♦ Red diode laser beam point, find the right treatment area exactly. ♦ High power built in water cooling system make the machine can be continuely use. Treatment Effect: Technical Specification: Laser source: Q-Switch ND: YAG solid-state laser Wave length: 1064nm, 532nm Output Energy: Single pulse: 1064nm: 100-800mj; 532nm:100-400mj Energy density (max.): Double pulse: 1064nm: 100-1600mj; 532nm:100-800mj 1064nm: 15.0J/cm2; 532nm:8j/cm2 Pulse duration: 750ps Repetition Rate: 1-10hz adjustable Spot Size: φ2-10mm adjustable Light guide beam: 650nm red laser Cooling System: Closed Cycle Water to Air Heat Exchanger Laser delivery: Korea 7 jointed articulated arm Controlling system: 10.4inch TFT color touch screen Power requirement: 220V,10A,50/60Hz; 110v,10A, 50/60Hz Machine dimensions: 680mm×400mm×820mm Net weight: 75kg Note: Technical data changed will not inform specially Packing&Delivery Contact:  Ruby Mu Email:   ruby@sanhebeauty.net Mobile:   +8617633631496 (Whatsapp/wechat)

Newest Microneedle RF Fractional Equipment sano pinxel-2 RF machine face lifting Application * Remove wrinkle, skin tightening * Pigment and acne treatment * Lighten the scar or acne scar, make pore smaller * Skin rejuvenation, make skin more lighten and smooth * Lighten stretch marks Product Description Specifications Of Fractional RF Micro Needling Machine  Type MRF+SRF Screen 10 ' Color TFT LCD Input Power 50W Output Frequency 2MHz Output Wavelength PDT 650nm Cryo Temperature -5 degree Fractional RF   Microneedle Type SRF (Superficial Fractional RF) MRF (Microneedle Fractional RF)    High speed SRF---No pin Low gear SRF---No pin High speed MRF ---81pin,49pin,25pin Low gear MRF---81pin,49pin,25pin Relative humidity range lower 93% Atmostheric pressurer range 50KPa-106KPa Dimension  480mm x 295mm x 1060mm Weight  30kg Technology Advantages 1. Tips species Three kinds of microneedle tips (MRF): 25pin/ 49pin/ 81pin. One kind of superficial RF tip (SRF): 25 dot matrix tip, non-invasive. 2. Needles shooting system Automatic needles,can make the RF energy better distributed in dermis, so patients can get better treatment result. 3. Gold Plating Needle is durable and also has high Biocompatibility by applying Gold Plating. Patient with metal allergy could also use it with not concerning Contact Dermatitis. 4. Needle Depth Control : 0.5~3 mm Operates epidermis layer and dermis layer by controlling the needle depth in unit of 0.1 mm 5. Safety Needle System -Sterilized disposable needle tip -Operator can easily notice the applying RF energy from a red light 6. Needle Thickness Min: 0.01 mm The needle structure is easy to penetrate the skin with minimum resistance. 7. Without Pigment The energy of RF plays a role in dermis directly, therefore, there is no heat summation on the dermis to avoid the possibility of blister and pigment precipitation problems. 8. Without Side Effect The recovery time is short, such as Red face will be decreased in 1~2 days, the Cutin will be dropped within 3~4 days. It won't affect the daily life after treatment. and the patient can clean face and make up directly after operation as usually. 9. Two Treatment Methods There are two treatment ways with Dual Matrix tip and RF Micro needle tip to meet the needs of different clients. Contact with us: Contact Person: Alex Song, Sunny Zhao E-mail: Alex@sanolasers.com   Sunny@sanhebeauty.net Whatsapp: +86 15321516360    +86 18813196949

fast fat freezing cryolipolysis Slimming machine with 4 cryolipolysis handles Functions: Cryolipolysis is a new, non-invasive way to gently and effectively Reduce fat in targeted areas of the body that results in a noticeable, Advanced looking fat reduction in the treated areas.As triglyceride In fats will be converted into solid in particular low temperatures ,it Uses a cooling technology to selectively target fat bulges and Eliminate fat cells through a gradual process that does not harm the Surrounding tissues , reduce unwanted fat.      The contact cooling of the hand piece surface regulates the temperature of the skin and protects fine dermal structures, realizing the fat Body-reshape effects while tightening skin!Cryo Slimming Machine Body Shape,Cryolipolysis Fat Freezing System,Cellulites Freezing Fat Beauty System. Advantages       No surgery, no anesthesia, no needles, no scarring, no downtime. Safer than liposuction. Special design for the handpiece, no any pain feeling when finished the treatment; Single treatment can reduce 20-40% reduction in the fat layer. Color touch screens work on both handpiece and machine together. The handpiece is allocated with a 3.5inch colorful touch screen.     Adjustable vacuum power, adjustable temp by software on both handle & machine. Deflate auto, reduce pain feeling when finish treatment.1-4 handpieces optional which can work together; 2 kinds of different size handles can well meet the different degree of fatness clients. Every handpiece has 10 medical germicidal lamps; Minimum -15℃, temperature can be shown on both interfaces and handles screen.     Safe and precise cooling function for comfortable treatment procedure; New vacuum pressure technology, pressure could be adjusted gradually with 4 modes; Modular design for easy maintenance. Screens in the machine and in the handpiece are simultaneously displayed. Input Power 1800W  Frozen head pressure 0-100kpa RF energy 1-50J/cm2 Cavitation energy 1-70J/cm2 Frozen head operation screen size 4.2 Inch RF frequency 10M Cavitation Frequency 40K   Treatment handle’s quantity 5units( Optional) Frozen head temperature 15-5℃ Cooling System Semiconductor Cooling + water-cooling + air cooling Fuse specification Ø5×25　10A Power AC220V±10%，10A，50HZ / AC110V±10A，60HZ   Super Strong Cooling System Powerful booster water pump with unique 8L big water tank,and Japanese import copper radiator with 4 big fans all ensure the machine can keep working continually 12 hours. Popular and Hot Design Smart and high standard design of the cryo machine will help to improve the image of your salons or clinics Touch Screen On Each Applicator Touch screen on the applicator mackes it easy to adjust the setting. Double Air Pumps When two applicatiors working simultaneously,a single pump is not enough,our machine equipped with two separate powerfull air pumps to guarantee enough vaccum pressure. Best Freeze-15℃ degree  Strong cooli ng system ensure the temperature reach- 15%℃,much lower than-10℃ currently in the current market Four Big Treatment Cryo Handles Three different sizes of 4 handles wich can apply to different parts of body according to the fat thickness of each clients.   Contact with us: Contact Person: Alex Song, Sunny Zhao E-mail: Alex@sanolasers.com   Sunny@sanhebeauty.net Whatsapp: +86 15321516360    +86 18813196949

Functions P-MIX 755 808 1064nm Diode laser hair removal machine is mainly for professional hair removal. Such as permanently remove lip hair, beard hair, chest hair, armpit hair, limbs hair and unwanted hair on any parts of body. It is suitable for all skin and hair types. Specifications:  Laser type High Intensity 808nm diode laser Laser handle output power 2000W Total power 4000W Laser wavelength 755+808+1064nm Sapphire size (Spot size) 12*23mm Shots Guarantee 2 years no limited Treatment head temperature Max -16 degree Frequency 1-10 Hz Display 10.4 Inch Package size 82*55*120CM Gross weight 82 KG Advantages: 1.USA Imported coherent laser bar is more stable. And 1200W high power output laser energy can achieve the best hair removal. 2.Low investment and high return. The treatment head is guaranteed for 2 years with No limitation. 3.The constant temperature refrigeration module keeps the water temperature at about 20-25 degrees, which can ensure the system to work continuously for 48hours without stop. 4.Using advanced TEC and sapphire contact cooling technology, the terminal temperature is controlled under 5 ° C, and the skin is properly cooled during the hair removal process, while ensuring the possibility of zero frostbite. 5.The frequency reaches 10hz, the treatment is more fast. Certificate: FDA, Medical CE Machine in treatment:  Before and after treatment photos: Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service.

Product Pricinple Laser tattoo removal machine uses the blasting effect of laser. The laser effectively penetrates the epidermis and can reach the pigment clusters in the dermis. Because the laser has a very short action time (only a few nanoseconds) and the energy is extremely high, the pigment clusters instantly absorb The high-energy laser quickly expands and breaks into small particles. These small particles are swallowed by macrophages in the body and then excreted from the body. The pigment gradually fades and disappears, finally achieving the purpose of treatment. The energy of Picosecond laser can be absorbed by the blue and black melanin. The melanin will be fragmented so small that they can be metabolized by the lymphatic system or digested out of body. Thus the tattoo or other pigmentation will be removed without damage to the normal tissue. The treatment is safe and convenient without downtime and side effects. Through specialized fractional lens, Pico second laser can convert laser energy into gentle pressure to create new collagen by squeezing cells and activating the natural cell without burning or damaging the skin. Laser type Portable Pico second ND: YAG Laser Energy Level 100- 800mj Pulse width 2000ps wavelength 1064nm,532nm Frequency 1-20Hz adjustable Spot size 1-5mm Cooling system Water circulation refrigeration system + semiconductor refrigeration Dimension 82*55*120cm weight 82KG Advantages 1. imported handle pipe, not easy to broken 2. Active q-switch Pico second laser technology 3. 1064nm and 532nm treatment head can be changed 4. the frequency is 1-20hz adjustable Treatment Exhibition We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: Package and delivery We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service.

Aesthetic skin cooling system Introduction: Icool Cold Air -The skin cooling system-Designed for Superficial Aesthetic Procedures. Air cooling machine Feature: Can work with 808nm diode laser hair removal machine, co2 fractional laser machine, SHR machine, IPL machine and Nd yag laser machine...Suitable for all machines if patients feel pain and needs cooling. Offer a much comfortable treatment, say byebye to pain Air cooling device icool function 1. Cool skin before laser treatment 2. Cool skin after laser treatment 3. During treatment working together Best partner After inserted the connector assembly, The I-Cool  could works with 808nm diode laser hair removal machine, co2 fractional laser machine, SHR machine, IPL machine and Nd yag laser machine...Suitable for all machines if patients feel pain and needs cooling procedure.